CU 600V PVC Insulation PVC Jacket Mini Split Type TC-ER-JP SPEC10097

CU 600V PVC Insulation PVC Jacket Mini Split Type THHN/THWN Rated at 75ºC Wet 90ºC Dry

Download Category Specifications

Application & Features

Southwire’s 600 Volt Type TC-ER-JP control cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 75°C in wet locations and 90°C in dry locations, 105°C for emergency overload, and 150°C for short circuit conditions. For uses in Class I, II, and III, Division 2 hazardous locations per NEC Article 501 and 502. Constructions with 3 or more conductors are listed for exposed runs (TC-ER) per NEC 336.10. Sunlight Resistant - For Direct Burial - Silicone Free - VW-1 Rated.

Specifications

Select more options below for part numbers, packaging, and color options:

	Cond. Size	Conductor Number	Cond. Strands	Diameter Over Conductor (in) (cm)	Color	Insulation Thickness (mils) (mm)	Ground Size	Jacket Thickness (mils) (mm)	Approx. OD (in) (cm)	Copper Weight (lbs/1000') (kgs/km)	Approx. Weight (lbs/1000') (kgs/km)	DC Resistance at 25C (ohms/1000') (ohms/km)	AC Resistance at 75C (ohms/1000') (ohms/km)	Min. Bend Radius (in) (cm)	Allowable Ampacity Raceway 75C	Allowable Ampacity Raceway 90C
More Options	16 AWG 16 AWG	4 4	26 26		BK, RD, WE, GN BK, RD, WE, GN	20 0.51		45 1.14	0.343 0.87	32 48	72 107	4.487 6.68	5.406 8.05	1.4 3.56	- -	18 18
More Options	14 AWG 14 AWG	4 4	1 1	0.064 0.16	BK, RD, WE, GN BK, RD, WE, GN	20 0.51		45 1.14	0.348 0.88	50 74	89 132	2.631 3.92	3.170 4.72	1.4 3.56	16 16	20 20
More Options	14 AWG 14 AWG	3 3	7 7	0.064 0.16	BK, RD, GN BK, RD, GN	20 0.51	1 x 14 1 x 14	45 1.14	0.337 0.86	38 57	75 112	2.631 3.92	3.170 4.72	1.3 3.30	20 20	25 25
More Options	14 AWG 14 AWG	4 4	7 7	0.070 0.18	BK, RD, WE, GN BK, RD, WE, GN	20 0.51		45 1.14	0.351 0.89	51 76	93 138	2.631 3.92	3.170 4.72	1.4 3.56	16 16	20 20
More Options	14 AWG 14 AWG	7 7	7 7	0.070 0.18	BK, RD, BE, OE, YW, BN, RD/BK BK, RD, BE, OE, YW, BN, RD/BK	20 0.51		45 1.14	0.429 1.09	90 134	151 225	2.631 3.92	3.170 4.72	1.7 4.32	14 14	17 17

TBA stock codes are estimations only and actual product may vary. Please wait until a stock code is assigned to purchase connectors and/or fittings.

Standards & References

ASTM B3 Soft or Annealed Copper Wire
ASTM B8 Concentric-Lay-Stranded Copper Conductors
UL 83 Thermoplastic Insulated Wire and Cables (sizes 14 AWG to 1000 kcmil)
UL 1277 Electrical Power and Control Tray Cables
RoHS-3 Complies with European Directive 2015/863

Construction

Conductor:Solid or stranded bare copper per ASTM B3 or B8
Insulation:Polyvinyl Chloride PVC with Nylon sheath
Filler:Polypropylene filler
Binder:Polyester flat thread binder tape
Overall Jacket:Polyvinyl Chloride (PVC) Jacket

Resources

There are no downloadable resources for this product.