750-61 TINNED CU RW90 90 EPR/65 SOLONON BLACK 2000V SPEC25084 66988099

Southwire 2000V EPR/SOLONON Power Cable is suited for use in mass transit and general industry applications where flexibility, fire resistance, and low smoke generation are a concern. May be installed in wet or dry locations in cable trays or raceways. These cables are capable of operating continuously at a conductor temperature not in excess of 90°C for normal operation, 130°C for emergency overload conditions, and 250°C for short circuit conditions. Resistance to moisture and most oils, acids, and alkalis with an overall durable LSZH XLPO jacket. Meets Flame Spread and Smoke Release requirements of NFPA 130. Alternate constructions available upon request.

• ASTM B3 Soft or Annealed Copper Wire
• ASTM B8 Concentric-Lay-Stranded Copper Conductors
• ASTM B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire
• ASTM B172 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Copper Conductors (As Applicable)
• CSA C22.2 No. 38 Thermoset-insulated wires and cables
• CSA C22.2 No.230 Tray Cables - Rated TC-ER
• CSA C22.2 No. 2556 / UL 2556 Cable Test Methods
• CSA SUN RES - for Sunlight Resistant rating
• CSA ST1 Smoke Test - marked FT4-ST1 (1/0 and Larger)
• ICEA S-95-658 (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
• Oil Res I & Sun Res - AWG 8 & Larger
• IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test (1/0 and Larger)
• NFPA 130 Standard for Fixed Guideway Transit and Passenger Rail Systems (500kcmil & Larger)