SPEC: 26342

HVTECK CU 3/C 220NLEPR TS PVC AIA PVC 15kV 133% CSA SPEC26342

3 Conductor, 220 Mils No Lead Ethylene Propylene Rubber (NL-EPR), 133% Insulation Level, Tape Shield, Polyvinyl Chloride (PVC) Inner Jacket, Aluminum Interlocked Armour (AIA), Polyvinyl Chloride (PVC) Jacket

Download Category Specifications

Application & Features

Southwire's 15kV HVTECK is a CSA armoured cable for industrial and commercial medium voltage applications. Rated FT4, -40°C, Hazardous Locations (HL). These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated for 1000 lbs /FT maximum sidewall pressure. These cables feature sunlight and moisture resistance, exceptional corona resistance, resistance to most chemical soils and acids and are flame retardant.

Specifications

Select a set of products below for more information:

	Cond. Size	Cond. Strands	Diameter Over Conductor (in) (cm)	Diameter Over Insulation (in) (cm)	Insulation Thickness (mils) (mm)	Diameter Over Shield (in) (cm)	Inner Jacket Thickness (mils) (mm)	Diameter Over Armor (in) (cm)	Jacket Thickness (mils) (mm)	Approx. OD (in) (cm)	Approx. Weight (lbs/1000') (kgs/km)	Max Pull Tension (lbs) (kg)	Min. Bend Radius (in) (cm)
More Options	2 AWG 2 AWG	7 7	0.282 0.72	0.761 1.93	220 5.59	0.821 2.09	110 2.79	2.387 6.06	75 1.91	2.537 6.44	3035 4517	1592 722.12	17.8 45.21
More Options	1 AWG 1 AWG	19 19	0.322 0.82	0.800 2.03	220 5.59	0.860 2.18	110 2.79	2.471 6.28	75 1.91	2.621 6.66	3333 4960	2008 910.81	18.3 46.48
More Options	2/0 AWG 2/0 AWG	19 19	0.405 1.03	0.884 2.25	220 5.59	0.944 2.40	110 2.79	2.652 6.74	75 1.91	2.802 7.12	4089 6085	3194 1448.77	19.6 49.78
More Options	4/0 AWG 4/0 AWG	19 19	0.512 1.30	0.976 2.48	220 5.59	1.036 2.63	110 2.79	2.851 7.24	75 1.91	3.001 7.62	5181 7710	5078 2303.34	21.0 53.34
More Options	350 KCMIL 350 KCMIL	37 37	0.661 1.68	1.127 2.86	220 5.59	1.187 3.01	125 3.18	3.227 8.20	85 2.16	3.397 8.63	7242 10777	8400 3810.17	23.8 60.45
More Options	500 KCMIL 500 KCMIL	37 37	0.789 2.00	1.252 3.18	220 5.59	1.312 3.33	125 3.18	3.497 8.88	85 2.16	3.667 9.31	9152 13620	12000 5443.10	25.7 65.28
More Options	750 KCMIL 750 KCMIL	61 61	0.968 2.46	1.464 3.72	220 5.59	1.524 3.87	125 3.18	3.955 10.05	85 2.16	4.125 10.48	12385 18431	18000 8164.66	28.9 73.41
More Options	250 KCMIL 250 KCMIL	37 37	0.558 1.42	1.028 2.61	220 5.59	1.108 2.81	110 2.79	3.007 7.64	85 2.16	3.177 8.07	5915 8802	6000 2721.55	22.2 56.39

1 Comply with ICEA S-93-639 Appendix C for jacket thickness determination
^ Black outer jacket
† 3-#1awg grounds equal to 50% of the phase conductor
TBA stock codes are estimations only and actual product may vary. Please wait until a stock code is assigned to purchase connectors and/or fittings.

	Cond. Size	DC Resistance at 25C (ohms/1000') (ohms/km)	AC Resistance at 75C (ohms/1000') (ohms/km)	Capacitive Reactance (ohms/1000') (ohms/km)	Inductive Reactance (ohms/1000') (ohms/km)	Zero Sequence Impedance (ohms/1000') (ohms/1000')	Positive Sequence Impedance (ohms/1000') (ohms/1000')	Shield Short Circuit Current 6 Cycles	Allowable Ampacity Directly Buried 90C	Allowable Ampacity In Air 90C
More Options	2 AWG 2 AWG	0.162 0.24	0.204 0.30	0.048 0.07	0.047 0.07	0.579 + j0.421 0.579 + j0.421	0.204 + j0.048 0.204 + j0.048	2571 2571	201 201	172 172
More Options	1 AWG 1 AWG	0.128 0.19	0.162 0.24	0.044 0.07	0.045 0.07	0.535 + j0.402 0.535 + j0.402	0.162 + j0.045 0.162 + j0.045	2695 2695	228 228	197 197
More Options	2/0 AWG 2/0 AWG	0.081 0.12	0.102 0.15	0.038 0.06	0.042 0.06	0.471 + j0.367 0.471 + j0.367	0.102 + j0.042 0.102 + j0.042	2952 2952	292 292	260 260
More Options	4/0 AWG 4/0 AWG	0.051 0.08	0.065 0.10	0.031 0.05	0.039 0.06	0.426 + j0.328 0.426 + j0.328	0.065 + j0.039 0.065 + j0.039	3284 3284	372 372	342 342
More Options	350 KCMIL 350 KCMIL	0.031 0.05	0.041 0.06	0.026 0.04	0.036 0.05	0.388 + j0.280 0.388 + j0.280	0.041 + j0.036 0.041 + j0.036	3770 3770	487 487	460 460
More Options	500 KCMIL 500 KCMIL	0.022 0.03	0.030 0.04	0.022 0.03	0.034 0.05	0.365 + j0.248 0.365 + j0.248	0.030 + j0.034 0.030 + j0.034	4167 4167	573 573	556 556
More Options	750 KCMIL 750 KCMIL	0.014 0.02	0.023 0.03	0.020 0.03	0.032 0.05	0.339 + j0.210 0.339 + j0.210	0.024 + j0.032 0.024 + j0.032	4752 4752	668 668	678 678
More Options	250 KCMIL 250 KCMIL	0.043 0.06	0.056 0.08	0.029 0.04	0.038 0.06	0.413 + j0.310 0.413 + j0.310	0.056 + j0.038 0.056 + j0.038	3451 3451	410 410	376 376

* Inductive impedance is based on non-ferrous conduit with one diameter spacing center-to-center.
* CEC ampacities are based on:
3/C in air copper and aluminum: D17N
3/C direct buried copper and aluminum: D17E

Standards & References

ASTM B3 Soft or Annealed Copper Wire
ASTM B8 Concentric-Lay-Stranded Copper Conductors
CSA C22.2 No. 174 Cables in Hazardous Locations
CSA C22.2 No. 2556 & No. 0.3 Wire and Cable Test Methods
CSA C68.10 Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV
CSA C68.3 Shielded & Concentric Neutral Power Cable - 5 to 46 kV
CSA LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating
CSA HL - for Hazardous Locations rating
CSA SUN RES - for Sunlight Resistant rating
ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable
ICEA T-29-520 Flame Test (210,000 BTU/Hr)
IEEE 383 Flame Test (70,000 btu)
IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test
FT1 Flame Test (1,706 BTU/Hr nominal - Vertical Wire Flame Test)
AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)

Construction

Conductor:Class B compressed stranded bare copper per ASTM B3 and ASTM B8
Conductor Shield:Semi-conducting cross-linked copolymer
Insulation:220 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 133% insulation level
Insulation Shield:Strippable semi-conducting cross-linked copolymer
Copper Tape Shield:Helically wrapped 5 mil copper tape with 25% overlap
Filler:Interstices filled with non-hydroscoping/non-wicking fillers
Grounding Conductor:Class B compressed stranded bare copper ground per ASTM B3 and ASTM B8
Binder:Polypropylene tape
Inner Jacket:PVC inner jacket
Armour:Aluminum Interlocked Armour (AIA). (Optional galvanized steel armour GSIA available upon request)
Overall Jacket:Red Polyvinyl Chloride (PVC) Jacket

Resources

There are no downloadable resources for this product.