SPEC: 87001

4" EPEC-13.5 GRAY HDPE DUCT SPEC87001 63357301

Southwire #: 63357301

Download Category Specifications
PDF Excel Table
Select Product Specifications
Size
Length
Color

Application & Features

Designed to house and protect wire and cable products in various underground applications for commercial constructions, EV infrastructure expansions, Utility grid-hardening efforts, airports, mass transit, renewables, petrochemical, agriculture, and data centers. May be installed directly buried or encased in concrete. For above ground applications, HDPE conduit must be encased in a minimum of 2 inches of concrete.

Specifications

Size (Inches) 4 4
Wall Type EPEC-13.5 EPEC-13.5
Nom. OD (mils) (mm) 4500 114.30 mils mm
Minimum Wall Thickness 4.5 4.5
Nominal Inside Diamater (mils) (mm) 3 0.10 mils mm
Min. Bend Radius (inch) (inch) 50 50
Maximum Pulling Tension 9265 9265
Nominal Total Weight (lbs/1000') (kgs/km) 1913 2846 lbs/1000' kgs/km
Tape Type NONE NONE
Color GRAY GRAY
Stripe Color NONE NONE

TBA stock codes are estimations only and actual product may vary. Please wait until a stock code is assigned to purchase connectors and/or fittings.

Standards & References

  • ASTM D3350 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
  • ASTM F2160 Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
  • CSA CSA marking is available upon request
  • Buy American: Compliant with Buy American Requirements, found in 49 U.S.C. § 5323(j); specify “Made in the USA Only!” when ordering to ensure your project receives American made products.
  • NEMA TC-7 Smooth-Wall Coilable Electrical Polyethylene Conduit

Construction

High-Density Polyethylene (HDPE)

Resources

There are no downloadable resources for this product.