Single Conductor 2000V

PV 600-58 3EAL XLP Bk 2KV+ 4kR

Southwire #: 58549901

Download Category Specifications

PDF Excel Table

Select Product Specifications

Construction

Outer Jacket / Armor Color

Packaging

Application

Southwire’s 600 or 1000 Volt power cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short circuit conditions. For uses in Class I, II, and III, Division 2 hazardous locations per NEC Article 501 and 502.

Specifications

Stock #	58549901 58549901
No. of Conductors	0 0
Size (AWG or kcmil) (mm2)	600 KCMIL 600 KCMIL
No. of Strands	37 37
Insulation Thickness (mils) (mm)	135 3.43	mils mm
Nom. OD (mils) (mm)	1083 27.51	mils mm
Nominal Total Weight (lbs/1000') (kgs/km)	745 1109	lbs/1000' kgs/km

Standards & References

ASTM B800 8000 Series Aluminum Alloy Wire
ASTM B836 Compact Rounded Stranded Aluminum Conductors
UL 44 Thermoset-Insulated Wires and Cables
UL 1685 FT4 Vertical-Tray Fire Propagation and Smoke Release Test
ICEA S-58-679 Control Cable Conductor Identification Method 4
ICEA S-95-658 (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test
VW-1 (Vertical-Wire) Flame Test