SPEC: 48050

PantoFLEX™ DC Power Cable 2/C CU 1000V XLPE Insulation PVC Jacket. TC-ER XHHW-2 with Green Ground SPEC48050

Type TC-ER Control Cable 1000 Volt Copper Conductors, Cross-Linked Polyethylene Insulation XHHW-2, Polyvinyl Chloride (PVC) Jacket, Sunlight Resistant - For Direct Burial - Silicone Free

Download Category Specifications

Application & Features

Southwire’s 1000 Volt Type TC-ER PantoFLEX™ DC Power Cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short circuit conditions. For uses in Class I, II, and III, Division 2 hazardous locations per NEC Article 501 and 502. Type (TC-ER) per NEC 336.10. Silicone free.

Specifications

Select more options below for part numbers, packaging, and color options:

	Cond. Size	Conductor Number	Cond. Strands	Diameter Over Conductor (in) (cm)	Insulation Thickness (mils) (mm)	Jacket Thickness (mils) (mm)	Approx. OD (in) (cm)	Copper Weight (lbs/1000') (kgs/km)	Approx. Weight (lbs/1000') (kgs/km)
More Options	4/0 AWG 4/0 AWG	2 2	532 532	0.530 1.35	55 1.40	80 2.03	1.490 3.78	1445 2150	1879 2796
More Options	250 KCMIL 250 KCMIL	2 2	627 627	0.605 1.54	65 1.65	80 2.03	1.666 4.23	1713 2549	2211 3290
More Options	350 KCMIL 350 KCMIL	2 2	893 893	0.670 1.70	65 1.65	110 2.79	1.860 4.72	2360 3512	3037 4520

* Ampacity based on 2023 NEC Table 310(16): Ampacities of Insulated Conductors with Not More Than Three Current-Carrying Conductors in Raceway, Cable, or Earth (Directly Buried)
* Inductive Reactance is based on non-ferrous conduit with one diameter spacing center-to-center.
TBA stock codes are estimations only and actual product may vary. Please wait until a stock code is assigned to purchase connectors and/or fittings.

	Cond. Size	Conductor Number	Min. Bend Radius (in) (cm)	Max Pull Tension (lbs) (kg)	DC Resistance at 25C (ohms/1000') (ohms/km)	AC Resistance at 75C (ohms/1000') (ohms/km)	Inductive Reactance (ohms/1000') (ohms/km)	Allowable Ampacity Raceway 75C	Allowable Ampacity Raceway 90C
More Options	4/0 AWG 4/0 AWG	2 2	7.5 19.05	3385 1535.41	0.055 0.08	0.067 0.10	0.041 0.06	230 230	260 260
More Options	250 KCMIL 250 KCMIL	2 2	8.3 21.08	4000 1814.37	0.047 0.07	0.057 0.08	0.041 0.06	255 255	290 290
More Options	350 KCMIL 350 KCMIL	2 2	9.3 23.62	5600 2540.12	0.033 0.05	0.042 0.06	0.040 0.06	310 310	350 350

Standards & References

ASTM B3 Soft or Annealed Copper Wire
ASTM B172 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Copper Conductors
UL 44 Thermoset-Insulated Wires and Cables
UL 1277 Type TC-ER Standard Power and Control Cables (1000V 14AWG and Larger)
ICEA S-95-658 (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy

Construction

Conductor:Class I, flexible stranded, bare copper per ASTM B3 and B172
Insulation:Cross-Linked Polyethylene (XLPE) Type XHHW-2
Ground:Class I, flexible stranded, bare copper per ASTM B3 and B172 with green Cross-Linked Polyethylene (XLPE) Type XHHW-2 insulation
Fillers:Wax paper fillers added as needed for a round assembly
Binder:Polypropylene tape
Jacket:Black Polyvinyl Chloride (PVC)

Resources

There are no downloadable resources for this product.