Applications and Features: Power supply cable for VFDs and motors, suitable for cable tray, conduit, raceways, exposed run (TC-ER) and conforming to NFPA 79 2018. Suitable for free air and direct burial. Its flexible design is ideal for use on operation processes in accordance with NEC® Articles 336, 501 and 502 including, but not limited to: fans, pumps, conveyors, compressors, elevators and lifts, extruders, crushers and presses, assembly lines, food and beverage, wind energy and data centers. Cable is rated for -40C Cold Bend and Impact. Multiple approvals for multiple applications.
| Cond. Size | 10 AWG 10 AWG | |
| Conductor Number | 3 3 | |
| Cond. Strands | 105 105 | |
| Diameter Over Conductor (in) (cm) | 0.117 0.30 | inch cm |
| Insulation Thickness (mils) (mm) | 30 0.76 | mils mm |
| Drain Wire | 1x10 1x10 | |
| Diameter Over Shield (in) (cm) | 0.467 1.19 | inch cm |
| Jacket Thickness (mils) (mm) | 62 1.57 | mils mm |
| Approx. OD (in) (cm) | 0.591 1.50 | inch cm |
| Copper Weight (lbs/1000') (kgs/km) | 189 281 | lbs/1000' kgs/km |
| Approx. Weight (lbs/1000') (kgs/km) | 291 433 | lbs/1000' kgs/km |
* Ampacities based upon 2023 NEC Table 310.16. See NEC sections 310.15 and 110.14(C) for additional requirements.
