SPEC: 47322

3/C CU 5KV Type SHD-GC RHINOSHIELD^TM CPE Mining Cable 90°C. CSA - MSHA Approved SPEC47322

Flexible Copper conductors, EPR 100% Insulation Level, Cu/Nylon Braid Shield, Extra Heavy Duty Two Layer Chlorinated Polyethylene (CPE) Jacket with Optional Reflective Stripes

Download Category Specifications

Application & Features

RHINOSHIELD^TM Type SHD-GC is a heavy-duty trailing cable where flexibility and maximum protection is required. For use with mobile, reeling, or stationary mining equipment, continuous mining machines, longwall mining systems, and blast hole drillers. It is also an excellent choice for shovels, draglines, dredges, cranes and marine shore-to-ship power supplies, and anytime extra-durable, flexible cable is required. Suitable for continuous submersion in water. Ground check conductor provides fail-safe ground monitoring. Embossed print legend for easy cable identification. Cold Bend and Impact Tested to -50°C.

Specifications

Select a set of products below for more information:

	Cond. Size	Conductor Number	Cond. Strands	Diameter Over Conductor (in) (cm)	Insulation Thickness (mils) (mm)	Diameter Over Insulation (in) (cm)	Ground Check Size	Inner Jacket Thickness (mils) (mm)	Jacket Thickness (mils) (mm)	Approx. OD (in) (cm)	Approx. Weight (lbs/1000') (kgs/km)
More Options	1 AWG 1 AWG	3 3	385 385	0.347 0.88	110 2.79	0.627 1.59	8 8	90 2.29	125 3.18	1.963 4.99	2623 3903
More Options	500 KCMIL 500 KCMIL	3 3	1221 1221	0.900 2.29	125 3.18	1.188 3.02	6 6	120 3.05	185 4.70	3.356 8.52	8833 13145

TBA stock codes are estimations only and actual product may vary. Please wait until a stock code is assigned to purchase connectors and/or fittings.

	Cond. Size	DC Resistance at 25C (ohms/1000') (ohms/km)	AC Resistance at 75C (ohms/1000') (ohms/km)	Inductive Reactance (ohms/1000') (ohms/km)	Rated Strength (lbs) (kg)	Min. Bend Radius (in) (cm)	Allowable Ampacity In Air 90C
More Options	1 AWG 1 AWG	0.143 0.21	0.180 0.27	0.035 0.05	572 259.45	15.7 39.88	184 184
More Options	500 KCMIL 500 KCMIL	0.024 0.04	0.034 0.05	0.026 0.04	3420 1551.28	26.8 68.07	536 536

* Ampacities based upon ICEA S-75-381 Table H-1.
* Inductive impedance is based on non-ferrous conduit with one diameter spacing center-to-center.

Standards & References

ASTM B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire
ASTM B172 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Copper Conductors
CSA C22.2 No. 96 Portable Power Cables
ICEA S-75-381 Portable and Power Feeder Cables for Use in Mines

Construction

Conductor:Tin coated, soft drawn, annealed, flexible, rope-lay stranded copper per ASTM B33/B172
Separator Tape:Semi-conducting tape applied between the conductor and insulation to facilitate stripping
Conductor Shield:Semi-conducting cross-linked copolymer
Insulation:Ethylene Propylene Rubber (EPR) 100% Insulation Level
Insulation Braid Shield:Semi-conducting SBR tape applied to the phase insulation with a 50% overlap, adhesive side up. Tin coated, soft drawn, annealed, copper braid shield (60% minimum coverage), combined with color coded nylon (black, white, red) with a 40% maximum coverage
Ground Conductors:Two uninsulated, tin coated, soft drawn, annealed, rope stranded, flexible lay copper per ASTM B33/B172
Filler:Filler as needed to make round
Ground Check Conductor:Tin coated, soft drawn, annealed, rope stranded, flexible lay copper per ASTM B33/B172 with yellow, high strength, polypropylene insulation
Reinforcement:Reinforcing twine applied between the two jacket layers
Inner Jacket:Black, mold cured, extra heavy-duty modified integral fill flame resistant, thermosetting Chlorinated Polyethylene
Outer Jacket:Black, mold cured, extra heavy-duty, flame resistant, thermosetting Chlorinated Polyethylene (CPE). Other colors available
Reflective Stripe:Highly visible reflective stripe embedded into the outer jacket to increase safety and help prevent cable runover (optional, contact your sales representative for part number)

Resources

There are no downloadable resources for this product.

3/C CU 5KV Type SHD-GC RHINOSHIELDTM CPE Mining Cable 90°C. CSA - MSHA Approved SPEC47322