SPEC: 60157

MC-PCS HCF Duo™ Power & Control/Signal Cable 277/480V Colors

Copper THHN/THWN Insulated Singles. Green Insulated Copper Grounding Conductor. UL Listed 600 Volts. Rated VW-1. Lightweight Interlocked Armor. Signal: 16 AWG Copper TFN insulated singles.

Download Category Specifications

Application & Features

Southwire MC-PCS HCF Duo™ Type MC All Purpose Hospital Care Facility Cable is suitable for use as follows:
- Branch-circuit wiring for patient care areas of hospitals, medical centers, and other health care facilities (when installed in accordance with NEC® Articles 517 and 330, and mechanically protected per Article 300.4). Such areas include nursing homes, dental offices, clinics, and outpatient facilities. Use in hazardous anesthetizing areas is prohibited.
- Applications requiring redundant, dedicated or isolated grounding paths.
- Fished or embedded in plaster.
- Concealed or exposed installations.
- Environmental air-handling spaces per NEC 300.22 (C).
- Places of Assembly per NEC 518.4 and theaters per NEC 520.5.
- Power, lighting, control, and signal circuits.
- Installation in cable tray and approved raceways.
- Under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2)
- Class I Div. 2, Class II Div 2, & Class III Div. 1 Hazardous Locations.
- Use with UL Listed MCI-A fittings.
- Binder tape with print legend wrapped around assembly.
- Type THHN/THWN rated 90ºC Dry.

Southwire MC-PCS HCF Duo™ Type MC Cable - meets or exceeds the following requirements:
- UL Online Product Guide Info - Metal-Clad Cable (PJAZ) ( www.ul.com )
- Federal Specification A-A59544 (formerly J-C-30B)
- NFPA 70 (National Electrical Code), Article 330
- Listed for use in UL 1, 2 and 3 Hour Through Penetration Firestop Systems

Specifications

Select a set of products below for more information:

	Cond. Size	Conductor Number	Color	Diameter Over Conductor (in) (cm)	Cond. Strands	Insulation Thickness (mils) (mm)	Ground Size	Diameter Over Armor (in) (cm)	Approx. Weight (lbs/1000') (kgs/km)
More Options	12 AWG 12 AWG	2 2	OE,GY OE,GY	0.080 0.20	Solid Solid	20 0.51	1x12 1x12	0.632 1.61	164 244
More Options	12 AWG 12 AWG	2 2	BN,GY BN,GY	0.080 0.20	19 19	20 0.51	1x12 1x12	0.651 1.65	170 253
More Options	12 AWG 12 AWG	3 3	BN,OE,GY BN,OE,GY	0.080 0.20	Solid Solid	20 0.51	1x12 1x12	0.674 1.71	193 287
More Options	12 AWG 12 AWG	3 3	BN,OE,GY BN,OE,GY	0.080 0.20	19 19	20 0.51	1x12 1x12	0.697 1.77	198 295
More Options	10 AWG 10 AWG	2 2	BN,GY BN,GY	0.101 0.26	Solid Solid	25 0.64	1x10 1x10	0.697 1.77	215 320

Note: Conductor number = number of phase conductors plus neutral. Does not include green ground.
TBA stock codes are estimations only and actual product may vary. Please wait until a stock code is assigned to purchase connectors and/or fittings.

	Cond. Size	Conductor Number	Min. Bend Radius (in) (cm)	DC Resistance at 25C (ohms/1000') (ohms/km)	AC Resistance at 75C (ohms/1000') (ohms/km)	Inductive Reactance (ohms/1000') (ohms/km)	Allowable Ampacity Raceway 75C	Allowable Ampacity Raceway 90C
More Options	12 AWG 12 AWG	2 2	4.4 11.18	1.662 2.47	2.002 2.98	0.054 0.08	25 25	30 30
More Options	12 AWG 12 AWG	2 2	4.6 11.68	1.662 2.47	2.002 2.98	0.054 0.08	25 25	30 30
More Options	12 AWG 12 AWG	3 3	4.7 11.94	1.662 2.47	2.002 2.98	0.054 0.08	25 25	30 30
More Options	12 AWG 12 AWG	3 3	4.9 12.45	1.662 2.47	2.002 2.98	0.054 0.08	25 25	30 30
More Options	10 AWG 10 AWG	2 2	4.9 12.45	1.040 1.55	1.253 1.86	0.050 0.07	35 35	40 40

* Ampacities based upon 2023 NEC Table 310.16 and do not take into account the overcurrent protection limitations in NEC 240.4(D) of 15 Amps for 14 AWG CU, 20 Amps for 12 AWG CU, and 30 Amps for 10 AWG CU (independent of the conductor temperature rating and stranding if size is present in table). Also, see NEC sections 310.15 and 110.14(C) for additional requirements.

Standards & References

ASTM B3 Soft or Annealed Copper Wire
ASTM B8 Concentric-Lay-Stranded Copper Conductors
UL 83 Thermoplastic Insulated Wires and Cables
UL 1569 Metal-Clad Cables
UL 1479 Standard for Safety Fire Tests of Penetration Firestops
UL 1685 FT4 Vertical-Tray Fire Propagation and Smoke Release Test
IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test
Buy American: Compliant with Buy American Requirements, found in 49 U.S.C. § 5323(j); specify “Made in the USA Only!” when ordering to ensure your project receives American made products.

Construction

Conductor:Solid copper per ASTM B3 and ASTM B8
Insulation:All phases are insulated with Polyvinyl Chloride with Nylon Sheath Type THHN/THWN
Ground:Green insulated ground. Polyvinyl Chloride with Nylon Sheath Type THHN/THWN
Signal:16 AWG Copper TFN Insulated Singles Pink, Purple. Overall light blue jacket over the signal cables
Binder:Mylar tape
Ground:Full-sized bare 8000 series aluminum grounding/bonding conductor. Armor and bare aluminum conductor form the equipment ground path.
Armor:Lightweight Interlocked Armor

Resources

There are no downloadable resources for this product.