2-7 MB CPRESS AL 15KV 175 mils 100% TRXLP 90C 10x14CN POLY JACKET SPEC81101 11963602

Southwire's 15kV cables are suited for use in wet and dry areas, conduits, ducts, direct burial, sunlight, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation. 130°C for emergency overload, and 250°C for short circuit conditions. Jacket types available that can be installed in conduit without the aid of lubrication. Rated for 1000 lbs./FT maximum sidewall pressure.

• ASTM B231 Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors
• ASTM B609 Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
• ICEA S-94-649 Standard for Concentric Neutral Cables Rated 5 - 46kV
• AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)
• Rural Utility Standard RUS 1728F-U1 or 1728.204 (Electric standards and specifications for materials and construction)
• UL 1072 Listed as MV 90 When Specified
• Optional CSA 68.5: -40ºC and MV 90ºC optional marking available upon request