SPEC 46203 CU Compressed 5/8kV NLEPR Insulation 133/100% IL CPE-TP Jacket. MV 105 - Tray Rated - Sunlight Resistant - For Direct Burial
Type MV-105 Three Conductor Copper, 115 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 133% Insulation Level, Tape Shield, Thermoplastic Chlorinated Polyethylene (CPE-TP) Jacket, Dual Rated UL/CSA. Silicone Free
Application
Southwire’s 5KV cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated at -40°C for cold bend 1/0 and larger. For uses in Class I and II, Division 2 hazardous locations per NEC Article 501 and 502. Rated for 1000 lbs./FT maximum sidewall pressure.
Specifications
Select a set of products below for more information:
| Conductor | Ground Wire | ||||||||
| No. of Conductors | Size (AWG or kcmil) (mm2) | No. of Strands | Insulation Thickness (mils) (mm) | Size (AWG) | No. of Strands | Nom. OD (mils) (mm) | Nominal Total Weight (lbs/1000') (kgs/km) | Allowable Ampacity | |
| 552345 |
3
3
|
2 AWG
2 AWG
|
7
7
|
115
2.92
|
6
6
|
|
1518
38.58
|
1567
2332
|
|
| 551848 |
3
3
|
2/0 AWG
2/0 AWG
|
19
19
|
115
2.92
|
4
4
|
|
1857
47.18
|
2584
3845
|
|
| 561038 |
3
3
|
4/0 AWG
4/0 AWG
|
19
19
|
115
2.92
|
3
3
|
|
2036
51.72
|
3496
5203
|
|
| 560450 |
3
3
|
350 KCMIL
350 KCMIL
|
37
37
|
115
2.92
|
2
2
|
|
2388
60.68
|
5209
7752
|
|
| 561230 |
3
3
|
500 KCMIL
500 KCMIL
|
37
37
|
115
2.92
|
1
1
|
|
2688
68.30
|
7025
10454
|
|
| 560449 |
3
3
|
750 KCMIL
750 KCMIL
|
61
61
|
115
2.92
|
1/0
1/0
|
|
3160
80.27
|
9973
14842
|
|
Standards & References
- ASTM B3: Soft or Annealed Copper Wire
- ASTM B8: Concentric-Lay-Stranded Copper Conductors
- ASTM B33: Standard Specification for Tin-Coated Soft or Annealed Copper Wire
- UL 1072: Medium-Voltage Power Cables
- UL 1685: FT4-ST1 Vertical-Tray Fire Propagation and Smoke Release Test (1/0 and Larger)
- UL 1685: Vertical-Tray Fire Propagation and Smoke Release Test
- CSA C22.2 No.230: Tray Cables - Rated TC-ER
- CSA C22.2 No. 2556 / UL 2556: Cable Test Methods
- CSA C68.10: Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV
- ICEA S-93-639: (NEMA WC 74) 5-46 KV Shielded Power Cable
- ICEA S-97-682: Standard for Shielded Utility Cable Rated for 5 - 46kV
- AEIC CS-8: Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)
- Made in America:: Compliant with both Buy American and Buy America Act (BAA) requirements per 49 U.S.C. § 5323(j) and the Federal Transit Administration Buy America requirements per 49 C.F.R. part 661
Construction
- Conductor: Class B compressed stranded bare copper per ASTM B3 and ASTM B8 (Tinned Copper per ASTM B33 optional)
- Conductor Shield: Semi-conducting cross-linked copolymer
- Insulation: 115 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 133% Insulation Level,
- Insulation Shield: Strippable semi-conducting cross-linked copolymer
- Copper Tape Shield: Helically wrapped 5 mil copper tape with 25% overlap
- Grounding Conductor: Class B compressed stranded bare copper ground per ASTM B3 and ASTM B8 (Tinned Copper per ASTM B33 optional)
- Filler: Wax paper filler
- Binder: Poly glass tape
- Overall Jacket: Thermoplastic Chlorinated Polyethylene (CPE-TP)
Resources
There are no downloadable resources for this product.
Related Products
100-Feet Contractor Grade 12/3 Lighted End American Made Cord - Wounded Warrior Project®
Model #: 2549SWUSA1
Model #: 2549SWUSA1
Specifications PDF
PROBAGBP, TOOL BACKPACK
Model #: PROBAGBP
Model #: PROBAGBP