4/0-532 CU 15KV JUMPER CABLE RED
Southwire #: 56948799
Single Conductor Flexible Conductor with an EPR Insulation Non-Shielded Jumper Cable
Application
Southwire’s medium voltage non-shielded jumper and switchgear cable is a flexible power cable that is intended for use in substations installed on insulators and inside switchgear isolated from ground and where a non-shielded flexible cable is desired. These cables are capable of operating continuously at a conductor temperature not in excess of 90°C. See Table 2 for installation guidelines. This cable is rated up to 40KV and is not UL listed.
Specifications
| Stock # | 56948799 56948799 | |
| Size (AWG or kcmil) (mm2) | 4/0 AWG 4/0 AWG | |
| No. of Strands | 532 532 | |
| Nom. OD (mils) (mm) | 979 24.87 | mils mm |
| Nominal Total Weight (lbs/1000') (kgs/km) | 961 1430 | lbs/1000' kgs/km |
Standards & References
- ASTM B33: Standard Specification for Tin-Coated Soft or Annealed Copper Wire
- ASTM B172: Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Copper Conductors
Construction
- Conductor: Flexible rope lay stranded annealed bare or tinned copper
- Conductor Shield: Nylon semi-conducting tape, helically applied
- Insulation: Heat, moisture, and ozone resistant Ethylene Propylene Rubber(EPR)
Resources
There are no downloadable resources for this product.
Related Products
100-Feet Contractor Grade 12/3 Lighted End American Made Cord - Wounded Warrior Project®
Model #: 2549SWUSA1
Model #: 2549SWUSA1
Specifications PDF
PROBAGBP, TOOL BACKPACK
Model #: PROBAGBP
Model #: PROBAGBP