SPEC 46321 CU Compact 15kV NLEPR Insulation 100% IL Black SIM-PVC Jacket. MV 105 - Tray Rated - Sunlight Resistant - For Direct Burial

500-35 CPT CU 175 MILS NL-EPR 15KV 100% T/S BLACK SIMpull PVC JACKET UL

Southwire #: 58351199

Type MV-105 Single Conductor Compact Copper, 175 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 100% Insulation Level, Tape Shield, SIMpull® Polyvinyl Chloride (PVC) Jacket, Dual Rated UL/CSA

Download Category Specifications

PDF Excel Table

Select Product Specifications

Construction

Outer Jacket / Armor Color

Packaging

Application

Southwire’s 15KV cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, and where su- perior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated at -35°C for cold bend. ST1 (low smoke) Rated for sizes 1/0 and larger. PVC jacket is made with SIM technology and has a coefficient of friction COF of 0.2. Cable can be installed in conduit without the aid of lubrication. Rated for 1000 lbs./FT maximum sidewall pressure.

Specifications

Stock #	58351199 58351199
No. of Conductors	1 1
Size (AWG or kcmil) (mm2)	500 KCMIL 500 KCMIL
No. of Strands	35 35
Insulation Thickness (mils) (mm)	175 4.45	mils mm
Nom. OD (mils) (mm)	1402 35.61	mils mm
Nominal Total Weight (lbs/1000') (kgs/km)	2206 3283	lbs/1000' kgs/km

Standards & References

ASTM B496 Compact Round Concentric-lay-standard copper
UL 1072 Medium-Voltage Power Cables
UL 1685 FT4 Vertical-Tray Fire Propagation and Smoke Release Test (1/0 and Larger)
CSA C22.2 No.230 Tray Cables - Rated TC-ER (1/0 AWG and Larger)
CSA C22.2 No. 2556 / UL 2556 Cable Test Methods
CSA C68.10 Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV
ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable
IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test (1/0 and Larger)
AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV

Construction

Conductor:Class B compact stranded per ASTM B496
Conductor Shield:Semi-conducting cross-linked copolymer
Insulation:175 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 100% Insulation Level,
Insulation Shield:Stripable semi-conducting cross-linked copolymer
Copper Tape Shield:Helically wrapped 5 mil copper tape with 25% overlap
Overall Jacket:Polyvinyl Chloride (PVC)