SPEC 43301 300V CU PVC/PVC Pairs POS
Type PLTC/ITC Instrumentation Cable 300 Volt Copper Conductors PVC Insulated Singles Overall Shield POS. PVC Jacket Heat, Moisture, and Sunlight Resistant RoHS rated for -30°C to 105°C
Application
Southwire’s Instrumentation Cables Type PLTC per UL 13 and Type ITC per UL 2250 are suitable for installations as outlined in NEC Article 336 for process control and instrumentation, control circuits for operation and interconnection of protective and signaling devices and for general use in manufacturing, industrial and commercial distribution systems. Cables are constructed with 7-strand copper conductors insulated with PVC. The paired conductors are colored black, white, and alpha-numeric printed. The overall assembly is covered with an aluminum polyester foil with 100% coverage and a tinned drain wire. The cable is suited for use in cable trays, raceways, conduit, aerial (when supported with a messenger) and direct burial. The cable is rated for -30°C to 105°C and rated for class I Div II hazardous locations, and sun resistant. The jacket is black PVC with a nylon ripcord for easy removal.
Specifications
| Conductor | Ground Wire | ||||||||
| No. of Conductors | Size (AWG or kcmil) (mm2) | No. of Strands | Insulation Thickness (mils) (mm) | Size (AWG) | No. of Strands | Nom. OD (mils) (mm) | Nominal Total Weight (lbs/1000') (kgs/km) | Allowable Ampacity | |
| 591448 |
5
5
|
18 AWG
18 AWG
|
7
7
|
|
|
|
411
10.44
|
71
106
|
|
| 591450 |
9
9
|
18 AWG
18 AWG
|
7
7
|
|
|
|
446
11.33
|
104
154
|
|
| 591452 |
17
17
|
18 AWG
18 AWG
|
7
7
|
|
|
|
579
14.71
|
184
274
|
|
| 566928 |
2
2
|
16 AWG
16 AWG
|
7
7
|
9
0.23
|
|
|
255
6.48
|
42
63
|
|
| 596822 |
5
5
|
16 AWG
16 AWG
|
7
7
|
|
|
|
409
10.40
|
87
129
|
|
| 596816 |
9
9
|
16 AWG
16 AWG
|
7
7
|
|
|
|
516
13.11
|
147
218
|
|
| 596817 |
17
17
|
16 AWG
16 AWG
|
7
7
|
|
|
|
662
16.83
|
261
388
|
|
| 591452 |
17
17
|
18 AWG
18 AWG
|
7
7
|
|
|
|
579
14.71
|
184
274
|
|
Standards & References
- UL 13: Power-Limited Circuit Cables
- UL 2250: Instrumentation Tray Cable
- IEEE 383: Flame Test (70,000 btu)
- IEEE 1202: FT4 Flame Test (70,000) BTU/hr Vertical Tray Test
- EPA 40 CFR, Part 26, Subpart C: heavy metals per Table 1, TCLP method
- RoHS-2: (European Directive 2011/65/EU)
- NEC Article 336: Power and Control Tray Cable
Construction
- Conductor: Class B stranded bare copper per ASTM B-3 and B-8
- Insulation: Twisted pair with Premium Grade Polyvinyl Chloride (PVC) .Color code: Black/White alpha-numeric print alternate and inverted. 1-ONE, 2-TWO
- Overall Drain Wire: Tinned Copper
- Overall Shielded: 100% coverage aluminum/polyester foil shield with a drain wire as shown in step 3
- Rip Cord: Rip cord under jacket for ease of removal
- Jacket: Black sunlight, and moisture resistant Polyvinyl Chloride (PVC)
Resources
Related Products
