SPEC: 44030
2/0-324 CU 15KV JUMPER CABLE RED
Southwire #: 56942599
Single Conductor Flexible Conductor with an EPR Insulation Non-Shielded Jumper Cable
Application
Southwire’s medium voltage non-shielded jumper and switchgear cable is a flexible power cable that is intended for use in substations installed on insulators and inside switchgear isolated from ground and where a non-shielded flexible cable is desired. These cables are capable of operating continuously at a conductor temperature not in excess of 90°C. See Table 2 for installation guidelines. This cable is rated up to 40KV and is not UL listed.
Specifications
| Cond. Size (AWG/Kcmil) | 2/0 2/0 | |
| Conductor Number | 1 1 | |
| Cond. Strands | 324 324 | |
| Diameter Over Conductor (in) (cm) | 0.400 1.02 | inch cm |
| Insulation Thickness (mils) (mm) | 220 5.59 | mils mm |
| Approx. OD (in) (cm) | 0.883 2.24 | inch cm |
| Approx. Weight (lbs/1000') (kgs/km) | 674 1003 | lbs/1000' kgs/km |
† Ampacities based upon 2023 NEC Table 310.16. Also, see NEC sections 310.15 and 110.14(C) for additional requirements.
Standards & References
- ASTM B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire
- ASTM B172 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Copper Conductors
Construction
- Conductor: Flexible rope lay stranded annealed bare or tinned copper
- Conductor Shield: Nylon semi-conducting tape, helically applied
- Insulation: Heat, moisture, and ozone resistant Ethylene Propylene Rubber(EPR)
Resources
There are no downloadable resources for this product.
Related Products
100-Feet Contractor Grade 12/3 Lighted End American Made Cord - Wounded Warrior Project®
Model #: 2549SWUSA1
Model #: 2549SWUSA1
Specifications PDF
PROBAGBP, TOOL BACKPACK
Model #: PROBAGBP
Model #: PROBAGBP