750 STR 3E AL (380mm2) SIMpull(R) XHHW-2/RW90 WHITE
1000 Volts/600 Volts Alumaflex® Brand Aluminum Alloy (AA-8176) Conductor. Cross-linked Polyethylene (XLPE) Insulation. Moisture Resistant High Heat.
Application
Southwire® SIMpull XHHW-2® aluminum conductors are primarily used in conduit or recognized raceways for service and feeder wiring as specified in the National Electrical Code. XHHW-2 conductors may be used in wet or dry locations at temperatures not to exceed 90°C. Voltage rating for XHHW-2 conductors is 1000 volts. Suitable for use in Health Care Facilities per section 517.160 of the NEC where a dielectric constant of 3.5 or less may be specified. This product is designed to be installed without the application of pulling lubricant.
Specifications
| Size (AWG or kcmil) (mm2) | 750 KCMIL 750 KCMIL | |
| No. of Strands | 61 61 | |
| Nom. OD (mils) (mm) | 1076 27.33 | mils mm |
| Insulation Thickness (mils) (mm) | 80 2.03 | mils mm |
| Nominal Total Weight (lbs/1000') (kgs/km) | 832 1238 | lbs/1000' kgs/km |
| Allowable Ampacity at 60C | 320 320 | |
| Allowable Ampacity at 75C | 385 385 | |
| Allowable Ampacity at 90C | 435 435 |
Standards & References
Southwire SIMpull® Aluminum Type XHHW-2 conductors comply with the following:
- ASTM – B800 and B801
- Listed per UL Standard 44
- NOM-ANCE 90° C
- Federal Specification A-A-59544
- National Electrical Code, NFPA 70
- NEMA WC-70 (ICEA S-95-658) Construction Requirements
- Gas & Oil Resistant II
- Sunlight Resistant
- CT Rated
- FT4
- RoHS/Reach Compliant
Construction
Southwire Type XHHW-2 aluminum conductors are Alumaflex® brand AA-8000 series aluminum alloy, compact stranded. The insulation is an abrasion, moisture and heat resistant SIMpull® thermoset cross-linked polyethylene. Marked sunlight resistant.
Resources
Related Products
