Southwire® XHHW-2 copper conductors are primarily used in conduit, Cable Tray or other recognized raceways for services, feeders, and branch circuit wiring, as specified in the National Electrical Code. XHHW-2 copper conductors may be used in wet or dry locations at temperatures not to exceed 90° C. Voltage rating for XHHW-2 conductors is 600 volts. Suitable for use in Health Care Facilities per Section 517.160 of the National Electrical Code where a dielectric constant of less than 3.5 maybe specified.
|Stock #||11292001 11292001|
|Size (AWG or kcmil) (mm2)||14 AWG 14 AWG|
|No. of Conductors||1 1|
|No. of Strands||7 7|
|Nom. OD (mils) (mm)||134 3.42||mils mm|
|Insulation Thickness (mils) (mm)||30 0.76||mils mm|
|Nominal Total Weight (lbs/1000') (kgs/km)||17 26||lbs/1000' kgs/km|
|Allowable Ampacity at 60C||15 15|
|Allowable Ampacity at 75C||15 15|
|Allowable Ampacity at 90C||15 15|
|UPC #||032886238031 032886238031|
Southwire® SIMpull XHHW-2® copper conductors comply with the following:
Southwire® SIMpull XHHW-2® copper conductors are annealed (soft) copper. Insulation is an abrasion, moisture, and heat resistant thermoset cross-linked polyethylene (XLPE). Conductor sizes 8 AWG and larger are marked sunlight resistant. Colors are available and may be subject to economic order quantity.