SPEC: 22050
10-3 CU NMD-90 ORANGE JACKET W/G CSA 492 FT
Southwire #: 47181304
Application & Features
Southwire's Romex® SIMpull® NMD90 cables may be used for both exposed work in dry locations or concealed work in dry or damp locations.
The maximum allowable conductor temperature is 90°C. The minimum recommended installation temperature is -25°C for two-conductor cables
and -10°C for three-conductor cables (with suitable handling procedures). Material should be properly stored above 0°C for 24 hours prior to installation. The maximum voltage rating for all intended applications is 300 volts. Consult the Canadian Electrical Code1 for further information related to applications.
Specifications
| Cond. Size | 10 AWG 10 AWG | |
| Conductor Number | 3 3 | |
| Cond. Strands | Solid Solid | |
| Diameter Over Conductor (in) (cm) | 0.101 0.26 | inch cm |
| Inner Layer Thickness (mils) (mm) | 35 0.89 | mils mm |
| Ground Size | 1x12 1x12 | |
| Outer Layer Thickness (mils) (mm) | 30 0.76 | mils mm |
| Approx. OD (in) (cm) | 0.479 1.22 | inch cm |
| Copper Weight (lbs/1000') (kgs/km) | 115 171 | lbs/1000' kgs/km |
| Approx. Weight (lbs/1000') (kgs/km) | 168 250 | lbs/1000' kgs/km |
Standards & References
- ASTM B3 Soft or Annealed Copper Wire
- ASTM B8 Concentric-Lay-Stranded Copper Conductors
- ASTM B787 19 Wire Combination Unilay-Stranded Copper Conductors
- CSA C22.2 No. 48 non-metallic sheathed cable
- ICEA S-95-658 (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
- IEEE 1202/FT4 Flame Test (70,000 BTU/hr) 350kcmil and Larger
Construction
- Conductor: Solid per ASTM B3 or Combination unilay-stranded copper conductors per ASTM B787.
- Insulation: All phases are insulated with Polyvinyl Chloride with Nylon Sheath
- Jacket: Polyvinyl Chloride PVC jacket utilizing SIMpull Technology.
Resources
There are no downloadable resources for this product.