2/0-2/0-2/0 CU XHHW SEU PVC JACKET 500 FT

Southwire #: 21828901

Service Entrance Cable SE Stype U. Service Entrance Cable, 600 Volt. Individual Conductors Rated XHHW-2. Jacket and Individual Conductors Sunlight Resistant.

Download Category Specifications
PDF Excel Table
Select Product Specifications
Outer Jacket / Armor Color


Southwire® Type SEU, service entrance cable is primarily used to convey power from the service drop to the meter base and from the meter base to the distribution panelboard; however, the cable may be used in all applications where Type SE cable is permitted. SEU may be used in wet or dry locations at temperatures not to exceed 90°C. Voltage rating is 600 volts.


Stock # 21828901 21828901
Size (AWG or kcmil) (mm2) 2/0 AWG 2/0 AWG
No. of Conductors 2 2
No. of Strands 19 19
Size (AWG) 2/0 2/0
No. of Neutrals 1 1
No. of Strands 18 18
Nom. Width (mils) (mm) 1317 33.47 mils mm
Nom. Height (mils) (mm) 791 20.11 mils mm
Nominal Total Weight (lbs/1000') (kgs/km) 1447 2153 lbs/1000' kgs/km
Insulation Thickness (mils) (mm) 55 1.40 mils mm
Allowable Ampacity at 60C 145 145
Allowable Ampacity at 75C 175 175
Allowable Ampacity at 90C 195 195
Allowable Ampacity in Dwelling 200 200

Standards & References

  • ASTM- All applicable standards
  • UL Standard 44 for XHHW-2 conductors
  • UL Standard 83 for THHN/THWN conductors
  • UL Standard 854
  • Federal Specification A-A-59544
  • National Electrical Code, NFPA 70. 2011 Edition


  • Southwire® style SEU cable is constructed with sunlight resistant Type XHHW-2 conductors or Type THHN/THWN conductors. Copper conductors are annealed (soft) copper. Cable assembly plus reinforcement tape are jacketed with sunlight resistant gray polyvinyl chloride (PVC). Available as 1 or 2 conductor with a concentric ground. SEU cable is jacketed with gray sunlight resistant polyvinyl chloride (PVC).


There are no downloadable resources for this product.