SPEC 45307 CU 600/1000V XLPE Insulation AIA PVC Jacket XHHW-2. CT Rated -Sunlight Resistant - For Direct Burial - Silicone Free
Type MC Power Cable 600Volt Four Conductor Copper, Cross Linked Polyethylene (XLPE) insulation XHHW-2 Aluminum Interlocked Armor (AIA), Polyvinyl Chloride (PVC) Jacket with 1 Bare CU Ground. Silicone Free.
Application
Southwire’s 600 Volt Type MC power cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short circuit conditions. For uses in Class I, II, and III, Division 2 hazardous locations per NEC Article 501 and 502. Silicone Free.
Specifications
Select a set of products below for more information:
| Conductor | Ground Wire | ||||||||
| No. of Conductors | Size (AWG or kcmil) (mm2) | No. of Strands | Insulation Thickness (mils) (mm) | Size (AWG) | No. of Strands | Nom. OD (mils) (mm) | Nominal Total Weight (lbs/1000') (kgs/km) | Allowable Ampacity | |
| 574460 |
4
4
|
6 AWG
6 AWG
|
7
7
|
45
1.14
|
|
|
965
24.51
|
651
969
|
|
| 890229 |
4
4
|
1/0 AWG
1/0 AWG
|
19
19
|
55
1.40
|
|
|
1452
36.90
|
1908
2839
|
|
| 551452 |
4
4
|
350 KCMIL
350 KCMIL
|
37
37
|
65
1.65
|
|
|
2299
58.40
|
5710
8497
|
|
| 605410 |
4
4
|
500 KCMIL
500 KCMIL
|
37
37
|
65
1.65
|
|
|
2634
66.93
|
7854
11688
|
|
| 563407 |
4
4
|
600 KCMIL
600 KCMIL
|
61
61
|
80
2.03
|
|
|
2915
74.04
|
9303
13845
|
|
Standards & References
- ASTM B3: Soft or Annealed Copper Wire
- ASTM B8: Concentric-Lay-Stranded Copper Conductors
- UL 44: Thermoset-Insulated Wires and Cables
- UL 1569: Metal-Clad Cables
- UL 1685: Vertical-Tray Fire Propagation and Smoke Release Test
- ICEA S-58-679: Control Cable Conductor Identification Method 3 (1-BLACK, 2-RED, 3-BLUE, 4-ORANGE)
- ICEA S-95-658: (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
Construction
- Conductor: Class B compressed stranded bare copper per ASTM B3 and ASTM B8
- Insulation: Cross Linked Polyethylene (XLPE) Type XHHW-2
- Grounding Conductor: Class B compressed stranded bare copper per ASTM B3 and ASTM B8
- Filler: Paper filler (cable size 8 & 6 uses Polypropylene filler)
- Binder: Polypropylene tape
- Armor: Aluminum Interlocked Armor (AIA)
- Overall Jacket: Polyvinyl Chloride (PVC) Jacket
Resources
There are no downloadable resources for this product.