Southwire’s 600 Volt Type MC power cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short circuit conditions. For uses in Class I, II, and III, Division 2 hazardous locations per NEC Article 501 and 502. Silicone Free.
| Cond. Size | 6 AWG 6 AWG | |
| Cond. Strands | 7 7 | |
| Diameter Over Conductor (in) (cm) | 0.177 0.45 | inch cm |
| Insulation Thickness (mils) (mm) | 45 1.14 | mils mm |
| Diameter Over Armor (in) (cm) | 0.865 2.20 | inch cm |
| Jacket Thickness (mils) (mm) | 50 1.27 | mils mm |
| Approx. OD (in) (cm) | 0.965 2.45 | inch cm |
| Approx. Weight (lbs/1000') (kgs/km) | 650 967 | lbs/1000' kgs/km |
| Max Pull Tension (lbs) (kg) | 671 304.36 | lbs kg |
| Min. Bend Radius (in) (cm) | 6.8 17.27 | inch cm |
