AL POLY DUPLEX SERVICE DROP
Aluminum Conductors. Polyethylene or Crosslinked Polyethylene Insulation.
Application
Primarily used for 120 volt overhead service applications such as street lighting, outdoor lighting, and temporary service for construction. To be used at voltages of 600 volts phase-to-phase or less and at conductor temperatures not to exceed 75°C for polyethylene insulated conductors or 90°C for crosslinked polyethylene (XLP) insulated conductors.
Specifications
Select a set of products below for more information:
| Conductor | Ground Wire | ||||||||
| No. of Conductors | Size (AWG or kcmil) (mm2) | No. of Strands | Insulation Thickness (mils) (mm) | Size (AWG) | No. of Strands | Nom. OD (mils) (mm) | Nominal Total Weight (lbs/1000') (kgs/km) | Allowable Ampacity | |
| 102517 |
2
2
|
6 AWG
6 AWG
|
7
7
|
45
1.14
|
|
|
451
11.47
|
63
94
|
|
| 102574 |
2
2
|
4 AWG
4 AWG
|
7
7
|
45
1.14
|
|
|
564
14.35
|
114
169
|
|
| 102582 |
2
2
|
2 AWG
2 AWG
|
7
7
|
45
1.14
|
|
|
689
17.50
|
175
261
|
|
| 102590 |
2
2
|
1/0 AWG
1/0 AWG
|
9
9
|
60
1.52
|
|
|
870
22.10
|
280
417
|
|
Standards & References
Southwire's duplex service drop cable meets or exceeds the following ASTM specifications:
- B-230 Aluminum Wire, 1350-H19 for Electrical Purposes.
- B-231 Aluminum Conductors, Concentric-Lay-Stranded.
Construction
Conductors are concentrically stranded, compressed 1350-H19 aluminum. Insulated with either polyethylene or crosslinked polyethylene (XLP). Neutral messengers are concentrically stranded 6201, AAC, or ACSR.
- 1350
Resources
There are no downloadable resources for this product.