SPEC 44031 1/C CU EPR CPE Medium Voltage Non-Shielded Jumper & Switchgear Cable

Single Conductor Tinned Copper EPDM Insulation with a CPE Jacket Non-Shielded Jumper Cable

Download Category Specifications

PDF

Application

Southwire’s medium voltage non-shielded cable is intended for use in substations installed on insulators and inside switchgear isolated from ground and where a non-shielded cable is desired. These cables are capable of operating continuously at a conductor temperature not in excess of 90°C. See Table 2 for installation guidelines.

This cable is rated up to 40KV and is not UL listed. See Table 2 for Installation Guidelines

Specifications

To browse SKUs, select from the following:

To see specifications for this product, visit the CableTechSupport™ Services website.

Standards & References

ASTM B3: Soft or Annealed Copper Wire
ASTM B8: Concentric-Lay-Stranded Copper Conductors
ASTM B33: Standard Specification for Tin-Coated Soft or Annealed Copper Wire

Construction

Conductor: Tinned copper class B or C
Tape: Binder tape for ease of insulation removal
Insulation: Heat, moisture, and ozone resistant Ethylene Propylene Diene Monomer (EPDM)
Jacket: Thermoplastic Chlorinated Polyethylene CPE jacket