SPEC 26361 HVTECK AL 3/C 175NLEPR TS PVC AIA PVC 15kV 100% CSA
3 Conductor, 175 Mils No Lead Ethylene Propylene Rubber (NL-EPR), 100% Insulation Level, Tape Shield, Polyvinyl Chloride (PVC) Inner Jacket, Aluminum Interlocked Armour (AIA), Polyvinyl Chloride (PVC) Jacket
Download Category Specifications
PDF
Application
Southwire's 15kV HVTECK is a CSA armoured cable for industrial and commercial medium voltage applications. Rated FT4, -40°C, Hazardous Locations (HL). These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated for 1000 lbs /FT maximum sidewall pressure. These cables feature sunlight and moisture resistance, exceptional corona resistance, resistance to most chemical soils and acids and are flame retardant.
Specifications
To browse SKUs, select from the following:
To see specifications for this product, visit the CableTechSupport™ Services website.
Standards & References
- ASTM B801: Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy
- ASTM B836: Compact Rounded Stranded Aluminum Conductors
- CSA C22.2 No. 174: Cables in Hazardous Locations
- CSA C22.2 No. 2556 & No. 0.3: Wire and Cable Test Methods
- CSA C68.10: Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV
- CSA C68.3: Shielded & Concentric Neutral Power Cable - 5 to 46 kV
- CSA: LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating
- CSA: HL - for Hazardous Locations rating
- CSA: SUN RES - for Sunlight Resistant rating
- ICEA S-93-639: (NEMA WC 74) 5-46 KV Shielded Power Cable
- ICEA T-29-520: Flame Test (210,000 BTU/Hr)
- IEEE 383: Flame Test (70,000 btu)
- IEEE 1202: FT4 Flame Test (70,000) BTU/hr Vertical Tray Test
- FT1: Flame Test (1,706 BTU/Hr nominal - Vertical Wire Flame Test)
Construction
- Conductor: Class B compact stranded 8000 Series aluminum per ASTM B800 and ASTM B836
- Conductor Shield: Semi-conducting cross-linked copolymer; A conductor separator is used for cable size larger than or equal to 500 Kcmil
- Insulation: 175 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 100% insulation level
- Insulation Shield: Strippable semi-conducting cross-linked copolymer
- Copper Tape Shield: Helically wrapped 5 mil copper tape with 25% overlap
- Filler: Interstices filled with non-hydroscoping/non-wicking fillers
- Grounding Conductor: Class B compressed stranded bare copper ground per ASTM B3 and ASTM B8
- Binder: Polypropylene tape
- Inner Jacket: PVC inner jacket
- Armour: Aluminum Interlocked Armour (AIA)
- Overall Jacket: Red Polyvinyl Chloride (PVC) Jacket
Resources
There are no downloadable resources for this product.