Rated 1 out of
5
by
sigh from
Broken Out Of the Box
The product was broken out of the box. I was hoping my experience would be different than the other commenters here. I tested the batteries and they were good. I also tried with new batteries. I double checked the orientation of the batteries several times and neither part of the device turned on or showed any signs of life. Having to call customer support on day one is a bad start for a product that has a lifetime warranty.
Date published: 2016-09-20
Rated 1 out of
5
by
nonickname from
you get what you pay for
I bought this 4 hours ago and will be returning it tomorrow. I needed to identify 4 out of 6 telephone lines at my house, the sensitivity was all over the place. Ended up just separating all the lines at the de-mark and homed out the jacks. Even after identifying the telephone lines, it still wasn't performing properly. DO NOT WASTE YOUR MONEY
Date published: 2017-01-09
Rated 1 out of
5
by
crnow from
Broken out of the box TWICE
I bought this at two different Lowes stores. Bought the first and it wouldn't work right out of the packaging. Took it to another Lowes because it was the last one available at the first. The lowes rep tried it, replaced it with another, and it had the same issue out of the box. Both the wand and the tester wouldn't work.
Date published: 2016-09-03
Rated 1 out of
5
by
Oleg from
Dead on Arrival
I bought this device for my project at home. I was not able even to successfully turn device on. I replaced batteries and it did not helped. Item did not work from the start. I can not return it because the way item was packaged from manufacturer that you have to destroy a package to get item out.
Date published: 2021-11-29
Rated 2 out of
5
by
Cecilcoxtech89 from
Broke the first week I had it dissappointed
I purchased two of this tone and probe kit after the first one was stolen I purchased a replacement and in the first week the part that generate the tone stopped working completely tried new batteries still it would not turn on and make a tone the wand part worked fine.
Date published: 2016-08-28
Rated 5 out of
5
by
Ag11 from
I bought one for a side job and it works great!!
I bought one today for a side project installing security cameras and it works great! Was able to successfully trace out all my wires! The belt clip makes it super convenient to carry around! Also have a cable tester and love it! Love that a $50 product does the same thing as an $80 dollar Fluke Product! I want to get the 120AP tone and probe set next to work with my tester! What other tools can I add to my arsenal?!
Date published: 2017-12-03
Rated 5 out of
5
by
BFARIS from
It's fantastic
I've been a field technician for over 5+ and this is my favourite tool to use, it never skips a beat! I never had to use any overpriced "fluke" probe and toners, I doubt I'm ever going to have to upgrade. It's an absolute steal. BUY IT!
Date published: 2023-03-04
Rated 2 out of
5
by
mcomeau334 from
SUPER QUIET.... AT TIMES
Sometimes, this thing is so quiet, you cant here the tone. Other times it works great. I should have went with the Fluke. Other Southwire products i have work pretty well, so this is disappointing.
Date published: 2019-01-14
Bazaarvoice SAP Hybris Integration Version 2.8.2
Can it be used to check 220 output
Asked by: David 1967
The T200K is a tone and probe kit that will trace signal through a non-energized circuit. It will not measure output, only trace signal.
Answered by: Southwire1
Date published: 2021-07-14
Can this Amplifier Probe be used with the M300P in place of the T120AP? In some literature for the M300P it says can be used with any amplifier probe and other places it specifies the T120AP which isn't available locally and the T200K is.
Asked by: Mike M
The amplifier probe that is included with the T200K can be used with the tone generator function of the M300P.
Answered by: SW Tools
Date published: 2020-06-12
WILL THIS DETECT THE SIGNAL BY PLACING THE PROBE AGAINST THE CABLE AND NOT AT THE ENDS.
Asked by: MICHAEL D
For us to better help you with your question please contact our team at 855-798-6657 and we will be happy to assist.
Answered by: SW Tools
Date published: 2020-03-10
Can this model be used for automotive?
Asked by: MileHigh
For us to better help you with your question please contact our team at 855-798-6657 and we will be happy to assist.
Answered by: SW Tools
Date published: 2020-03-10
Can t200k be used to find short in a auto?
Asked by: Peter123
For us to better help you with your question please contact our team at 855-798-6657 and we will be happy to assist.
Answered by: SW Tools
Date published: 2020-03-10
Is there a way to disable the auto off on the t 200 wire tracer?
Asked by: Jeff 1735
Please contact our team at 855-798-6657 for further assistance.
Answered by: SW Tools
Date published: 2020-03-10
IS THE T200K CAPABLE OF TESTING THE CIRCUIT BY PLACING THE PROBE AGAINST THE CABLE AND
THE CONNECTOR ENDS.
Asked by: MICHAEL D
Please contact our team at 855-798-6657 or southwirecustomerservice@southwire.com for further assistance.
Answered by: SW Tools
Date published: 2020-03-09
will the T200k work on 12/14 awg?
Asked by: sparks
The T200K can send a signal down a non-energized cable such as 12/14 AWG.
Answered by: Southwire
Date published: 2019-12-12
Bazaarvoice SAP Hybris Integration Version 2.8.2
