Rated 3 out of
5
by
Jose from
Good brand
I Try this brand to see how it work. Less accurate in finding the right outlet.
Date published: 2016-08-17
Rated 1 out of
5
by
Slinkygun from
Junk
Does not work. Tried it many times. Does not do what it says.
Date published: 2025-08-24
Bazaarvoice SAP Hybris Integration Version 2.8.2
How do you locate a circuit breaker for a circuit that is dead?
Asked by: Elias
We are happy to help! Please contact our team at 855-798-6657 for further assistance.
Answered by: SW Tools
Date published: 2023-10-07
How can I track a wire with this product.. not to breaker but I am trying to straighten out some switch wiring someone did for me
Asked by: Snobro
We are happy to help! Please contact our team at 855-798-6657 for further assistance.
Answered by: SW Tools
Date published: 2023-10-07
No matter how I use it, I have followed the instructions, it will show the two breakers next to each other as being the right one. Only the top one is correct. I knew before using the device which breakers were correct. Why showing two next to each other?
Asked by: DaisyMae
Please contact our team at 855-798-6657 for further assistance.
Answered by: SW Tools
Date published: 2023-10-07
Scanned circuit breakers, the breaker finder beeped faster, but never green lighted on the correct breaker. It didn't green light on any breaker, but the first time through it green lighted on two breakers, one of which was the correct one to turn off.
Asked by: Big Daddy H
Please contact our team at 855-798-6657 or southwirecustomerservice@southwire.com for further assistance.
Answered by: SW Tools
Date published: 2023-10-07
can i get Alligator clip adapter for 4121os circuit breaker finder with GFCI
Asked by: Bill pleasant hills
Please contact our team at 855-798-6651 for further assistance.
Answered by: SW Tools
Date published: 2023-10-07
41210s scanning head does not change to continuous tone when trying to pair with transmitter. What is problem?
Asked by: Garyw
For us to better help you with your question please contact our team at 855-798-6657 and we will be happy to assist.
Answered by: SW Tools
Date published: 2023-10-07
Please, How can I use it if the outlet is 220 VAC? Thank you
Asked by: Roberto
Please refer to the instruction manual on our website (http://www.southwiretools.com/tools/tools/41210S) under the downloads tab. If you have any further questions please reach out to our team at 855-798-6657 and we will be happy to help!
Answered by: Southwire
Date published: 2020-04-05
How can I use the 41210S in a 220 VAC outlet? , thank you
Asked by: Roberto
Please refer to the instruction manual on our website (http://www.southwiretools.com/tools/tools/41210S) under the downloads tab. If you have any further questions please reach out to our team at 855-798-6657 and we will be happy to help!
Answered by: Southwire
Date published: 2020-04-05
My transmitter won’t light up when I plug into a outlet and outlet is good.
Asked by: Robbie
Hi Robbie, sorry for that inconvenience. Have you tried contacting our customer service team at toolcsn@southwire.com or call us at 1-855-SWTOOLS? They will be happy to help you and fix this problem. Thank you!
Answered by: Southwire
Date published: 2020-01-20
What is the range of the device, will it still detect a signal from a house with 3 floors? Also if my circuit breaker panel is setup horizontally (breakers going from left to right) rather than vertical (top to bottom) Can it still scan effectively?
Asked by: NeedMoreInfo
The Circuit Breaker Finder will still work in a house with 3 stories on an energized circuit. As long as the unit is ‘calibrated’ by scanning the breakers twice, yes. Information on this is found in the manual!
Answered by: swtools
Date published: 2019-01-31
Does this with the circuit breaker alligator clips work on doorbell wires? Or do those not have enough power to use it?
Asked by: Dan steg
Please call our team at 855-798-6657 to explain this job further so we can better assist you!
Answered by: swtools
Date published: 2019-01-31
Does the 41210S identity a bad gfci switch
Asked by: Gary george
This unit isn’t designed to check for Outlet Wiring. It does have the capability to trip the GFCI which can let you know if the outlet is working correctly in that regard.
Answered by: swtools
Date published: 2019-01-31
A breaker is coming up red flashing light without the transponder being plugged into an outlet what would cause this?
Asked by: Jim274
Please call our Tools Team at 855-798-6657 so we can troubleshoot this issue.
Answered by: swtools
Date published: 2018-04-30
My husband has one of your circuit breaker finder and needs a manual. How can I get a manual for this circuit breaker finder?
Asked by: Pgahagan
Please see the link below to the manual for the 41210S.
http://www.southwiretools.com/tools/file.get.do?file_id=267
Answered by: swtools
Date published: 2018-02-15
Where is serial number? For registering
Asked by: Lefover
The serial number can be found on the backside of the transmitter. There will be a silver sticker with a 10 digit number.
Answered by: swtools
Date published: 2018-01-02
My 41210S Circuit Breaker Finder stopped working after one day. How do I get it repaired?
Asked by: ROB319
Please call our team at 855-798-6657 for assistance.
Answered by: swtools
Date published: 2017-12-26
41210s transmitter light not on and not functioning. ??
Several years old but kept in excellent condition.
Please advise
Asked by: Gbclaytor
If the transmitter isn’t functioning, I would recommend having that replaced. Please call our team at 855-798-6657 for assistance.
Answered by: swtools
Date published: 2017-12-18
41210S rated at 120 Max. Sometimes circuits run a little "hot", say 123 volts. Will the 41210S handle 123 Volts?
Asked by: Curious
The 41210S should have no problem at 123V. Thank you.
Answered by: SouthwireTools
Date published: 2017-06-26
Will this tool trace a wire from an outlet without power?
Asked by: Ozark_traveler
No. The transmitter only works if there is power.
Answered by: SouthwireTools
Date published: 2017-06-05
Price?
Where can I buy it in El Monte California ?
Asked by: Enrique
Please see the "Where to Buy" section on our website for pricing and a distributor in your area: http://www.southwiretools.com/tools/basic/wheretobuy. Thank you.
Answered by: SouthwireTools
Date published: 2017-06-05
Transmit light not working. I plugged it into a 20amp outlet and heard a pop. Doesn't trip a gfci in testing. What now?
Asked by: Branford
Please contact our customer service team at 1-855-798-6657 and we will assist you with this. Thank you!
Answered by: SouthwireTools
Date published: 2017-06-05
What is the range of the transmitter?
Asked by: Dano
There is no set range – It will from the outlet back to the circuit breaker panel. Thank you.
Answered by: SouthwireTools
Date published: 2017-04-10
I bought this tool and my transmitter doesn't always work. How can I get s replacement transmitter
Asked by: John Weisheitinger
Please contact our customer service team at 1-855-798-6657 and they will assist you with this. Thank you.
Answered by: SouthwireTools
Date published: 2017-03-29
need replacement manual
Asked by: bill42
Please email us at ToolCSN@Southwire.com and we will email you the replacement manual. Thank you.
Answered by: SouthwireTools
Date published: 2017-03-20
It turns green steady tone on the wrong breaker sometime it is on the wrong electrical panel I have 2 of them since I have 2 meters. What is wrong?
Asked by: Smokeyak
In order to better assist you, we will need some more information. Please call 1-855-798-6657 and we will connect you with our product specialist who can accurately identify the issue. Thank you.
Answered by: SouthwireTools
Date published: 2017-03-14
Does there have to be a current in the electrical system for the circuit tracer to work?
Asked by: sparky1
The circuit breaker finder only works if the power is on. Thank you.
Answered by: SouthwireTools
Date published: 2017-03-03
Operating instructions say the when scanning the head of the transmitter the beeper should change to a continuous tone I only get a pulsating tone. Something wrong?
Asked by: Neil
The tip of the probe will turn green and the tone will get a lot faster. However, it can sound like it is still pulsating. If it is not getting faster and the tip does not turn green, please call us at 1-855-798-6657 so we can connect you with one of our product specialist.
Answered by: SouthwireTools
Date published: 2017-03-03
Can i trace a braker without an electric power on?
Asked by: Jay80
This unit will only work on energized circuits.
Answered by: SouthwireTools
Date published: 2017-03-03
What is the range this product will work up to?
Asked by: Rico
We need more information regarding the range you are looking for. Please call our customer service team at 1-855-798-6657 to assist with this. Thank you.
Answered by: SouthwireTools
Date published: 2017-03-03
Would this work tracing 277v lighting circuit?
Asked by: Robert36
No, it is only rated for 120 Volts.
Answered by: SouthwireTools
Date published: 2017-02-23
Bazaarvoice SAP Hybris Integration Version 2.8.2
