Rated 5 out of
5
by
Daniel78 from
The best clamp meter I had for the price
Hi
Im a Electronic Technician and Industrial electrician I work on High Energy Panels.
I bought this 4 years ago and without expecting too much and I can assure it exceed my expectations. Look.. I have 4 clamp meters more.
one unit, the other one a name with F (yellow case), also another F(black case) and other american good brand as is . None of them has such great features like this one
1) 1000A maximum current measurement without external probes 2) TRMS 3) Incorporated led flashlight and back light 4) Fast, accurate and stable readings even in capacitance mode 5) 60meg ohm max resistance scale 6) NCV (non contact voltage detector. And plus is CAT IV rating and cost a half than other recognized brand. A half. Its only lack is a secretary.. joke. Btw I haven replaced the battery in years using this all day long. Don´t hesistate guys.
Date published: 2020-07-16
Rated 2 out of
5
by
Brayan Muniz from
not that tough
bough the clamp meter about a month ago, dropped it from waist height (I'm 5'11)and the screen broke. . .paid $178.00 for it I thought It would would have a little more integritty than that. I'm dissapointed. can't even get a hold of anyone from south wire to see if it has any kind of warranty. the supply store I purchased it from won't warranty me amother one,
Date published: 2018-09-10
Bazaarvoice SAP Hybris Integration Version 2.8.2
Hi. Is there anyway to turn off the backlit display? I don't need that bright display when it's daylight outside or inside.
Asked by: Robert A W
The backlight illuminates the display when the ambient light is too low to view the readings. To turn the backlight on or off, press the HOLD ligthbulb button until the backlight turns on or off. Please view the entire operating manual using the link below for more instructions.
https://www.southwire.com/tools-equipment/test-measurement/maintenancepro-1000a-truerms-ac-dc-clamp-meter/p/59686740
Answered by: Southwire1
Date published: 2023-03-16
On the display, above the word AUTO there are some vertical bars that go across the display. What do these bars indicate?
Asked by: Jim Park
The bar graph will basically display the same readings that the digital readout will but show it as a bar graph instead of viewing a reading with the decimal spot.
Answered by: Southwire1
Date published: 2023-01-12
will the clamp read dc amps direct?
Asked by: al61
For us to better help you with your question please contact our team at 855-798-6657 and we will be happy to assist.
Answered by: SW Tools
Date published: 2020-03-11
What differences are there between the 22070T and the 23070T?
Asked by: dsm7
For us to better help you with your question please contact our team at 855-798-6657 and we will be happy to assist.
Answered by: SW Tools
Date published: 2020-03-11
Does this clamp meter have a slot to clip the probes to use as a third hand?
Asked by: Suav
Please look under the downloads tab for the operating manual with all the 23070T features.
Answered by: SW Tools
Date published: 2020-03-10
Can I get this meter with calibration papers?
Asked by: Kevin42
Our meters do not arrive with calibration papers. They can be recalibrated through ATS at which point they will have papers confirming the calibration.
Answered by: Southwire
Date published: 2019-10-16
Where is this made at?
Asked by: Arthur
This meter is made from globally sourced parts!
Answered by: swtools
Date published: 2021-02-22
Is there any way to turn the volume up on the tone it's so quiet even pin a room with nothing running it can hardly be heard
Asked by: Kurt 70
Unfortunately, no. It is not possible to adjust the volume on this unit or any of our meters.
Answered by: swtools
Date published: 2018-06-09
Bazaarvoice SAP Hybris Integration Version 2.8.2
