Rated 2 out of
5
by
GMG46 from
Great for tight spaces
This bit provides much needed shortness for drilling between wood studs. At first it was very sharp and worked great, but after a lot of change outs it seemed like the metal that the bit is made out of was too soft/ prone to damages rat least where it sits in the chuck of the drill. The worm of the bit got worn down fairly quickly as well so I wish I could have seen sharpness retention for a longer period of time.
Date published: 2018-03-20
Rated 5 out of
5
by
MasterSparky from
Great bit, Sharp and Strong!
I tested this bit with my 18v Milwaukee drill. The bit was sharp enough to make easy work of the 2x4 that I drilled though. I will say that if you intend to drill though more than 2 inches check out one of Southwire's longer bits. I drilled this one into a 4x6 but its started to bind up when it could no longer eject the wood, makes scene. Check out the picture.
Date published: 2018-03-11
Rated 4 out of
5
by
ThumperJ_007 from
Chews through wood great!
This bit chews through wood like a hot knife through butter. However, I was trying to drill through a top plate of a wall and was just not getting through, so I repositioned the bit in my drill and I got it to close to the indent and when I tried to drill again, the every end of the bit broke off. The bit still works just can't use it in an extension bit.
Date published: 2018-03-21
Rated 5 out of
5
by
MinnesotaToolGuy from
Clean holes
I really liked the screw tip for self starting it really grabs the wood and gives a nice start, makes a nice clean hole and works in tight spots but also having the 1/4 shank I can easily add an extension on it for a little extra length. It worked great for running security in wood door frames.
Date published: 2018-03-04
Rated 5 out of
5
by
RaulT from
Effortless and easy
The screw tip really helps guide you and grip the wood and desired position much better. The bit attaches quite easily too. The holes come out very clean and smooth without leaving jagged wood shavings behind. Seems to be very sturdy too. Had no issues with it.
Date published: 2018-03-05
Rated 5 out of
5
by
Matt51 from
Great combination with my smaller drill!
This shorter bit in my 12volt drill is very handy for popping a quick hole through a stud or floor to run my wires through and it’s a LOT faster than one of my hole saws. It’s a real time-saver!
Date published: 2018-03-21
Rated 5 out of
5
by
Tough Tool Reviewes from
Right Tool For the Job
This auger bit from Southwire did was expected. I was able to drill through several times of wood and this bit continued to perform. I am very pleased with all aspects of this bit.
Date published: 2018-03-20
Rated 5 out of
5
by
BluesPwr1009 from
Excellent Drill Bit
This auger bit makes clean, fast cuts. Must use with a drill handle for safety and proper control. Excellent addition to my drill bit collection--it just works.
Date published: 2018-03-20
Bazaarvoice SAP Hybris Integration Version 2.8.2
Bazaarvoice SAP Hybris Integration Version 2.8.2