Bazaarvoice SAP Hybris Integration Version 2.8.2
We have a #MPHSP stud punch. Can we replace the larger punch and die (cup) ourselves (and retaining screw), or do we need to send it to a service center? I do not see those parts available anywhere.
Thanks!
Asked by: EdJr
Thank you for your question! Here is some information you may find helpful.
Replacement punch & dies for the MPHSP are as follows:
Mold 7/8" (Cutter) [UPC #64214201]
Lower Mold 7/8" (Cup) [UPC #64214401]
Mold 1-11/32" (Cutter) [UPC #64218201]
Lower Mold 1-11/32" (Cup) [UPC #64218301]
Please call our customer service line at 855-798-6657 for assistance and to place an order.
Answered by: Southwire1
Date published: 2023-08-23
I'm trying to change the cup/cutter out for the larger size. I see nothing in the user manual pdf specifying how to do so. The cutter with the allen key in the center of the cutter just spins
Asked by: Robertt
We apologize for the difficulties you are having with this tool! Please reach out to our team at 855-798-6657 for assistance with changing the cutter.
Answered by: Southwire1
Date published: 2023-12-28
how long does it take to punch a hole, how many strokes of the handle per hole?
Asked by: valley drywall
This product punches 1 hole per stroke of the handle. Also, there is not a set time it takes, but it quickly and easily punches holes in 16 gauge structural steel studs.
Answered by: Southwire1
Date published: 2021-07-09
what is the part number for a replacement 1-11/32" cutter ?
Asked by: Anonymous
We are happy to help! Please contact our team at 855-798-6657 for further assistance.
Answered by: SW Tools
Date published: 2020-04-22
where is the how to video?
Asked by: carlon
We currently do not have a how to video, but please contact our team at 855-798-6657 and they can assist you with instructions.
Answered by: SW Tools
Date published: 2020-03-10
Will it work 2.5”x 6” 16 gauge steel studs?
Asked by: Schwartz
Adjustable for 3 5/8" and 6" studs, punches 7/8" or 1 11/32" holes.
Answered by: SW Tools
Date published: 2020-03-10
What viscosity hydraulic fluid goes in the Southwire Max Punch hydraulic hole cutter
Asked by: Don Ruby
Viscosity, kinematic:
350 mm2/s (-20 °C / -4 °F)
Method: ASTM D445
15 mm2/s (40,0 °C / 104,0 °F)
Method: ASTM D445
3,8 mm2/s (100 °C / 212 °F)
Method: ASTM D445
Recommended use: Hydraulic oil
Answered by: Southwire
Date published: 2019-11-13
Do you have spare parts for this tool?. I have one of these punches and the cutting ram is not returned by self, so the spring must be separated (or is broken) and therefore does not return when I open the hydraulic valve.
Asked by: Jordan
Please call our Tools Team at 855-798-6657 for further assistance!
Answered by: SW Tools
Date published: 2019-07-31
Bazaarvoice SAP Hybris Integration Version 2.8.2
