Cable Pulling & Fishing

PULLER, CABLE M6K-M MAXIS 6K W/ MOTOR 1 EA p-57648501 57648501

Southwire #: 57648501 Model #: M6K-M

Write a Review

A 6,000 lb. cable puller that only requires one person to set up in less than 2 minutes. The Maxis® 6K cable puller features two pulling speeds: 12 FEP at low and 44 FEP on high. The M6K-M is able to quickly adapt from underground to overhead pulls.

Where to Buy

Download Category Specifications

PDF Excel Table

Schedule a Demo

Contact your local rep to book a time to demo this product.

Schedule a Demo

Features & Benefits

Fast setup and operation: one person, 2 minute set up and operation. Quickly adapt from underground to overhead pull.
Lightweight: weighs 76 lb. and is easy to maneuver on job sites. M6K-M does not need to be bolted to the ground.
High capacity: 6,000 lb. pulling force.
Versatile: can adapt to virtually any wire pull.
6,000 lbs. peak pulling force.
One person, 2 minute setup and operate
2 Pulling speeds: 12 fpm on low (at no load) and 44 fpm on high (at no load)
Quickly adapts from underground to overhead pulls
No need to bolt to the ground on most pulls

Specifications

Model #	M6K-M M6K-M
UPC #	032886884191 032886884191
Product Height	15.0 38.10	inch cm
Product Width	20.0 50.80	inch cm
Depth	50.0 127.00	inch cm
Product Weight	165.0 74.84	lbs kg
Rated Capacity	3,000-6,000 LBS 3,000-6,000 LBS

Resources

M6K Owner's Manual

M6K Exploded Diagrams

we are interested in this kit can you please foreword us more info

Asked by: markdon

Please call our Tools Team at 855-798-6657 for further assistance!

Answered by: SW Tools

Date published: 2019-07-31

Do this model need to be anchor

Asked by: Shark

No, it does not need an anchor.

Answered by: Southwire

Date published: 2019-07-02

We have a Maxis 6K Cable Puller and need to know if there is a safety or cut off if a certain tension is met over the 6000 peak load. We are being questioned on the amount of tension it could pull since our tension meter we had plugged into read high.

Asked by: Ron Lee

We offer the TSS-01 Safety Footswitch System which includes a force indicator.

Answered by: Southwire

Date published: 2019-01-21

looking for part number for a 4' adapter and sleeve for a Maxis 6000

Asked by: Capital

Stock # 56834001 Model # P6-208-55E

Answered by: Southwire

Date published: 2019-01-21

I’m trying to pull four 500MCM thru 150’ of 3” EMT, three 90’s. Which machine would you recommend, 3,000 or 6,000 pounds?

Asked by: LuisL

We recommend the M6K-M since it offers more range.

Answered by: Southwire

Date published: 2019-01-21

Need operator manual for Maxis 6K Cable Puller, where can I find a down load ?

Asked by: Dj Iowa

We are happy to help, please call our Tools Team at 855-798-6657 for further assistance!

Answered by: Southwire

Date published: 2018-11-15

Where can I buy one of the cable pullers and what is the price for one

Asked by: Tanner

Please see the link below to our Where to Buy page or call 855-798-6657 and a member of our team can help you find a distributor in your area! http://www.southwiretools.com/tools/basic/wheretobuy

Answered by: swtools

Date published: 2018-10-22

What oil should I use for the gear box?

Asked by: Alexix

We recommend the use of 220W fully synthetic worm gear oil in all of our gearboxes.

Answered by: swtools

Date published: 2018-10-10

What oil use for switchgear 

Asked by: Alexix

We recommend the use of 220W fully synthetic worm gear oil in all of our gearboxes.

Answered by: swtools

Date published: 2018-11-16

Is this tugger still UL listed when matched with the Milwaukee Hole Hog?

Asked by: Mark Bartholomew

Yes, the UL listing is carried by the Milwaukee Hole Hawg drill.

Answered by: swtools

Date published: 2018-05-25

Hi, I'm looking for the replacement large pulley on the maxis 6000

Asked by: Mchavez

Please call 855-798-6657 and a member of our team can assist you.

Answered by: swtools

Date published: 2017-12-11

I have a M6K-M will smaller shoes fit., specifically looking to use 1-1/4 and 1-1/2 shoes

Asked by: KevinbKent

Yes. The M3K adaptors will also fit the M6K. Below are the specific sizes that you mentioned. Please let us know if you have other questions. Thank you. Stock No. Model No. Description 56-83-14-01 P3-208-55B Conduit Adaptor (1 1/4") 56-83-15-01 P3-208-55C Conduit Adaptor (1 1/2")

Answered by: SouthwireTools

Date published: 2018-11-16

What is the warranty on this unit M6K-M wire tugger

Asked by: Turkeyman

The Maxis M6K comes with a Five-Year Limited warranty and a One-Year Limited Warranty on Electrical Components. Thank you.

Answered by: SouthwireTools

Date published: 2017-11-20

can this unit pull in 3-500mcm and a 4/0 ground about 300' away?

Asked by: peter

We recommend the use of the SIMpull(TM) Calculator to determine pull tension. This app is available on Southwire.com, and will recommend the best Southwire puller for your job. Thank you.

Answered by: SouthwireTools

Date published: 2018-11-16

CAN I PULL 4 X 500MCM 225FT WITH THE SUPERHAWG

Asked by: WHSE

The Maxis 6K has a peak pulling force of 6000 LBS, to determine the pull tension of your job, we recommend the use of the SIMpull Calculator available at http://www.southwire.com/support/SIMpullCablePullCalculator.htm

Answered by: SouthwireTools

Date published: 2018-11-16

It is sold individually Gearbox?

Asked by: Saleh

The gearbox can be purchased as a replacement part, please contact 1(855)-798-6657 for more information.

Answered by: SouthwireTools

Date published: 2017-02-21

What's involved in extending the puller to a height of 11' 6"?

Asked by: Mike62heartland

The M6K-M can be extended out by removing the midframe pins and telescoping the forward section of the puller. If additional extension is needed 3 inch rigid can be inserted. Please contact our customer service department at 1(855) 798-6657 for more information.

Answered by: SouthwireTools

Date published: 2016-10-31

PULLER, CABLE M6K-M MAXIS 6K W/ MOTOR 1 EA p-57648501 57648501

A 6,000 lb. cable puller that only requires one person to set up in less than 2 minutes. The Maxis® 6K cable puller features two pulling speeds: 12 FEP at low and 44 FEP on high. The M6K-M is able to quickly adapt from underground to overhead pulls.

Features & Benefits

Specifications

Resources

we are interested in this kit can you please foreword us more info

Do this model need to be anchor

We have a Maxis 6K Cable Puller and need to know if there is a safety or cut off if a certain tension is met over the 6000 peak load. We are being questioned on the amount of tension it could pull since our tension meter we had plugged into read high.

looking for part number for a 4' adapter and sleeve for a Maxis 6000

I&rsquo;m trying to pull four 500MCM thru 150&rsquo; of 3&rdquo; EMT, three 90&rsquo;s. Which machine would you recommend, 3,000 or 6,000 pounds?

Need operator manual for Maxis 6K Cable Puller, where can I find a down load ?

Where can I buy one of the cable pullers and what is the price for one

What oil should I use for the gear box?

What oil use for switchgear&nbsp;

Is this tugger still UL listed when matched with the Milwaukee Hole Hog?

Hi, I'm looking for the replacement large pulley on the maxis 6000

I have a M6K-M will smaller shoes fit., specifically looking to use 1-1/4 and 1-1/2 shoes

What is the warranty on this unit M6K-M wire tugger

can this unit pull in 3-500mcm and a 4/0 ground about 300' away?

CAN I PULL 4 X 500MCM 225FT WITH THE SUPERHAWG

It is sold individually Gearbox?

What's involved in extending the puller to a height of 11' 6&quot;?

I’m trying to pull four 500MCM thru 150’ of 3” EMT, three 90’s. Which machine would you recommend, 3,000 or 6,000 pounds?

What oil use for switchgear

What's involved in extending the puller to a height of 11' 6"?