Bazaarvoice SAP Hybris Integration Version 2.8.2
I need to order a complete set of lock rings for the GP110 grip kit. Could you please let me know the correct part number or the rings.
Asked by: grizz
Please call our team at 855-798-6657 and they can provide you with all the information you need in order to purchase.
Answered by: Southwire
Date published: 2020-02-13
I bought the GP-110 and added a fifth grip for five wire pulls . The only thing is the fifth grip is the same length as the longest one in the set . Which makes the group a little large on the tail and the cover doesn't want to close. Please advise
Asked by: Lytle
We are happy to help, please call our Tools Team at 855-798-6657 for further assistance!
Answered by: Southwire
Date published: 2018-11-15
Is it possible to buy replacement parts for the complete Maxis Grips system?
Asked by: BECOBarb
Please call our team at call 855-798-6657 for assistance.
Answered by: swtools
Date published: 2018-04-24
I will be pulling cable 3 x 185 mm N2XSy 12 / 20kV, if maxis grip can be used. and if I can measure what size I should use
Asked by: Agus Purnomo
Maxis Grips are not designed for use with medium voltage cables.
Answered by: swtools
Date published: 2017-12-06
I will do 20kv cable withdrawal for 3x185 mm size, can use maxis grip
Asked by: Agus Purnomo
Maxis Grips are not designed for use with medium voltage cables.
Answered by: swtools
Date published: 2017-12-06
I am pulling 15 KV, 350, and 15 KV 2/0 alum wire. Can I use the Maxis grips? If so, which size? Thank you.
Asked by: J Sinclair
The Maxis® Grips® are designed for 600v cables and should not be used with medium voltage cable.
Answered by: swtools
Date published: 2019-08-02
I have a large amount of Southwire THHN compact aluminum cable to pull on my project. Since the overall diameter of the cable is smaller than normal, will your pulling grips fit this cable correctly?
Asked by: Joe G
To use Maxis® GRIPS™ with compact aluminum wire you will need to downsize your grips. The exact sizing is broken down on page 7 of the owner’s manual and is available for download on http://www.southwiretools.com/tools/tools/GP110 Under the downloads tab. Thank you.
Answered by: SouthwireTools
Date published: 2019-08-02
What is the range of wire sizes for the GP-110
Asked by: Jlytle6405
Maxis® Grips are designed to work with 1/0-750 MCM 600V cables.
Answered by: SouthwireTools
Date published: 2017-04-11
I have some 25KV armored, 750mcm Jacketed concentric neutral cables to pull in some ducts. Would the GP 110 cables be the right pulling grip for these?
Asked by: tbraun
The Maxis® GRIPS™ are designed to work exclusively on 600V conductors, and will not work on 25Kv armored cables.
Answered by: SouthwireTools
Date published: 2017-12-06
What material are they made of ?
Asked by: Fonz
These are made of steel. Thank you.
Answered by: SouthwireTools
Date published: 2017-03-07
Can I use these on stAndard 500 kcmil 1000v RW90 wire ?
Asked by: Slacasse
Unfortunately, Southwire’s Grips will not work with 1000v RW90 wire.
Answered by: SouthwireTools
Date published: 2017-01-18
I have a set of your pulling heads and I need replacement lock rings. But you do not list them on your web site, so how is a person to order replacements? do you sell them and how much?????????
Asked by: Duane
Duane, Please contact our customer service team at 1-855-798-6657 and they will assist you with this request. Thank you.
Answered by: SouthwireTools
Date published: 2017-12-06
The company I work for owns Maxis Grips kit "888-266-2947 TF". Over time, the teeth are rounding, and the rubber bands are gone. How can we acquire replacement parts for these tools? Thank you.
Asked by: Kevin
Kevin, Please contact our customer service team at 1-855-798-6657 and they will assist you with this. Thank you.
Answered by: SouthwireTools
Date published: 2017-09-19
I am pulling 4-500 Kcmil copper conductors in 3.5 in pvc, can I use the grips for this?
Asked by: Drew
Drew, Please call our customer service team at 1-855-798-6657 and they will connect you to a product manager who can assist you with this.
Answered by: SouthwireTools
Date published: 2019-09-23
I am looking at the Model# GP110 kit.
Can I order just the Pulling jackets Med & Lrg.
Asked by: jimw
Please call our customer service team at 1-855-798-6657 and they will assist you with this.
Answered by: SouthwireTools
Date published: 2017-09-19
can you replace the teeth in the head, I have had one break off in two different heads
Asked by: none
Please call our customer service team at 1-855-798-6657 and they will assist you with this.
Answered by: SouthwireTools
Date published: 2019-09-23
I need to add another grip to pull a second 4/O neutral with my feeder. I have the full kit just need to add this part, can you help me?
Asked by: Christopher
Chris, Please call our customer service team at 1-855-798-6657 and they will assist you.
Answered by: SouthwireTools
Date published: 2019-09-23
how much is this kit and how do i order
Asked by: jill
Jill, please call our customer service team at 1-855-798-6657 for pricing and to find a distributor near you.
Answered by: SouthwireTools
Date published: 2016-09-27
Is there a part number for the o-rings?
Asked by: Uncle Ed
The part number for the O-rings is LR110. Give us a call at 1-855-798-6657 to find a distributor in your area.
Answered by: SouthwireTools
Date published: 2016-09-27
Bazaarvoice SAP Hybris Integration Version 2.8.2
