Bazaarvoice SAP Hybris Integration Version 2.8.2
where is the Southwire MCF-01 Maxis Cable Feeder built?
Asked by: nickbrown29
Hello, and thank you for your question. This is manufactured in China. If you have any additional questions or feedback, please reach out to us at consumersupport@southwire.com.
Answered by: Southwire Care Team
Date published: 2025-10-25
Looking to pull 3-300mcm XHHW CU and 1-#2 XHHW CU 2500 ft. continuous straight pull. using the 10K XD. would this pose a problem with the conductors and would the Feeder work with this. I have used the SimCalc app and it does not reflect a problem ...o
Asked by: Beach
The maxis cable feeder and Triggers system would work in the pull you have outlined to reduce over-all pulling tensions. Thank you for reaching out!
Answered by: Southwire1
Date published: 2021-07-15
Can this be used on armoured fibre cable?
Asked by: Little
This product is designed specifically for Southwire® SIMpull® wire. This product can handles other wire sizes from 3/0 - 3 1/2" cables. Please reach out to our Tools department for more information at 855-798-6657.
Answered by: Southwire1
Date published: 2021-07-07
do you have a parts list for this feeder? I need to replace a fuse holder that broke
Asked by: mel2020
Please contact our team at 855-798-6657 for assistance with replacement.
Answered by: SW Tools
Date published: 2020-05-29
I need to feed 3 ea 500mcm 2kv non shielded 1.29" dia. @ 2 lbs. per ft. cable. Will your unit work
Asked by: mhigh
Please call our Tools Team at 855-798-6657 for further assistance!
Answered by: SW Tools
Date published: 2019-09-05
do you sell a basic speed control footswitch not wireless.
Asked by: zapper
Not at this time for this unit.
Answered by: Southwire
Date published: 2019-07-31
can we get parts for our maxis mcf-01 cable feeder ?
we are just looking for the handle
please let me know
Asked by: mike j
Yes, please call our customer service team at 855-798-6657 for assistance!
Answered by: swtools
Date published: 2019-07-31
GOOD MORNING
CAN THIS PRODUCT BE USED TO PULL OR PUSH A 5,6, OR 8 CONDUCTOR 500MCM PULL??
OR POSSIBLE IN COMBINATION WITH ANOTHER PC OF EQPT.
THANKS
Asked by: LARRY S
The Maxis Feeder can be used in forward or reverse for up to six x 500 kcmil THHN conductors. The feeder is frequently utilized for removing existing cables from conduits. The simultaneous use of cable pullers and feeders can be safely and easily accomplished by using Southwire’s Triggers, a wireless safety switch system (TSS01). Please call the product manager at (770) 832-5095 for more information. Thanks for using Southwire Tools.
Answered by: swtools
Date published: 2019-07-31
Bazaarvoice SAP Hybris Integration Version 2.8.2
