SPEC 45410 AL 2000V XLPE Insulation. RHH/RHW-2 PV
Single Conductor Photovoltaic (Type PV) Power Cable 2000 Volt Aluminum Conductor XLPE Insulation. Sizes 6AWG through 1000 kcmil. Heat, Moisture, and Sunlight Resistant RoHS. 90°C
Download Category Specifications
PDF
Application
The cable is available in sizes 6 AWG through 1000 kcmil. The product is approved for use in solar power applications per the NEC article 690 and is rated 90°C for exposed or concealed wiring in wet or dry locations. Individual conductors are stranded aluminum alloy covered with a cross-linked polyethylene (XLPE) insulation and is rated for direct burial. The cable is sunlight resistant, oil resistant PRI and PRII, RoHS compliant, passes -40°C cold bend.
Specifications
To browse SKUs, select from the following:
To see specifications for this product, visit the CableTechSupport™ Services website.
Standards & References
- ASTM B836: Compact Rounded Stranded Aluminum Conductors
- UL 44: Thermoset-Insulated Wires and Cables
- UL 854: Service Entrance Cable
- UL 4703: Standard for Photovoltaic Wire
- Made in America:: Compliant with both Buy American and Buy America Act (BAA) requirements per 49 U.S.C. § 5323(j) and the Federal Transit Administration Buy America requirements per 49 C.F.R. part 661
- VW-1: Vertical-Wire Flame Test (Optional)
- AA 8176: Stranded Aluminum Alloy Conductors
Construction
- Conductor: AlumaFlex® Compact Stranded Aluminum Alloy (AA-8176)
- Insulation: Cross-linked Polyethylene (XLPE)
Resources
There are no downloadable resources for this product.