28KV Copper XLP MV LLDPE Jacket

1000-58 MB CPTCU SUPER SMOOTH 28KV 280 mils 100% TRXLP 90C 32x10CN HiDri Plus POLY JACKET/CSA

Southwire #: 66157201

Copper Conductor. TRXLP Insulation. Bare Copper Concentric Neutrals. Low Density Polyethylene Jacket.

Download Category Specifications

Excel Table

Select Product Specifications

Construction

Outer Jacket / Armor Color

Packaging

Application

Predominantly used for primary underground distribution in conduit systems suitable for use in wet or dry locations, direct burial, underground duct, and where exposed to sunlight. To be used at 28,000 volts or less and at conductor temperatures not to exceed 90°C for normal operation.

Specifications

Stock #	66157201 66157201
No. of Conductors	1 1
Size (AWG or kcmil) (mm2)	1000 KCMIL 1000 KCMIL
No. of Strands	58 58
Insulation Thickness (mils) (mm)	280 7.11	mils mm
Nom. OD (mils) (mm)	2167 55.06	mils mm
Nominal Total Weight (lbs/1000') (kgs/km)	5265 7835	lbs/1000' kgs/km

Standards & References

Southwire 28kV HI-DRI Primary UD TRXLP Cable meets or exceeds the following ASTM specifications:

B3: Soft Annealed Copper Wire
B8: Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard or Soft
ICEA S-94-649
AEIC CS-8
RUS U-1
CSA

Construction

The cable is composed of a moisture blocked reverse lay, compact stranded soft drawn copper, covered by a semi-conducting cross-linked polyethylene strand shield, a tree-retardant cross-linked polyethylene primary insulation, and a semi-conducting cross-linked polyethylene insulation shield. Conductors are available with 100% insulation level. Has a Super Smooth conductor shield. A concentric neutral of bare copper wires and a sunlight resistant, -40°C rated, insulating linear low density polyethylene jacket are applied over the insulation shield. The cable is identified by surface print on the jacket and with the lightning bolt symbol for supply cables indented in the jacket. Red extruded stripes available upon request.