1/0-259 CU 15KV JUMPER CABLE RED SPEC44030 56942399

Southwire #: 56942399

Download Category Specifications

PDF Excel Table

Select Product Specifications

Construction

Outer Jacket / Armor Color

RED

Packaging

Application & Features

Southwire’s medium voltage non-shielded jumper and switchgear cable is a flexible power cable that is intended for use in substations installed on insulators and inside switchgear isolated from ground and where a non-shielded flexible cable is desired. These cables are capable of operating continuously at a conductor temperature not in excess of 90°C.

This cable is rated up to 40KV and is not UL listed. See Table 2 for installation guidelines

Specifications

Cond. Size	1/0 AWG 1/0 AWG
Conductor Number	1 1
Cond. Strands	259 259
Diameter Over Conductor (in) (cm)	0.379 0.96	inch cm
Insulation Thickness (mils) (mm)	210 5.33	mils mm
Approx. OD (in) (cm)	0.840 2.13	inch cm
Approx. Weight (lbs/1000') (kgs/km)	548 816	lbs/1000' kgs/km

† Ampacities based upon 2023 NEC Table 310.16. Also, see NEC sections 310.15 and 110.14(C) for additional requirements.
TBA stock codes are estimations only and actual product may vary. Please wait until a stock code is assigned to purchase connectors and/or fittings.

Standards & References

ASTM B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire
ASTM B172 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Copper Conductors

Construction

Conductor:Flexible rope lay stranded annealed bare or tinned copper
Conductor Shield:Nylon semi-conducting tape, helically applied
Insulation:Heat, moisture, and ozone resistant Ethylene Propylene Rubber(EPR)

Resources

There are no downloadable resources for this product.