4/0-19 3/C 3E AL 115 NL-EPR T/S 1X4 CU GW AIA YELLOW PVC JACKET 5KV 133%/8KV 100% UL
Southwire #: 59778099
Type MV-105 Three Conductor Aluminum, 115 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 133% Insulation Level, Tape Shield, Aluminum Interlocked Armor (AIA), Polyvinyl Chloride (PVC) Jacket
Application
Southwire’s 5KV cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated at -35°C for cold bend when UL listed. Rated at -40°C for cold bend and cold impact and marked with "LTGG" when CSA listed or dual UL/CSA listed. For uses in Class I and II, Division 2 hazardous locations per NEC Article 501 and 502.Rated for 1000 lbs./FT maximum sidewall pressure.
Specifications
| Stock # | 59778099 59778099 | |
| No. of Conductors | 3 3 | |
| Size (AWG or kcmil) (mm2) | 4/0 AWG 4/0 AWG | |
| No. of Strands | 19 19 | |
| Insulation Thickness (mils) (mm) | 115 2.92 | mils mm |
| Size (AWG) | 4 4 | |
| Nom. OD (mils) (mm) | 2224 56.49 | mils mm |
| Nominal Total Weight (lbs/1000') (kgs/km) | 2265 3371 | lbs/1000' kgs/km |
Standards & References
- ASTM B801: Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy
- ASTM B836: Compact Rounded Stranded Aluminum Conductors
- UL 1072: Medium-Voltage Power Cables
- UL 1685: Vertical-Tray Fire Propagation and Smoke Release Test
- ICEA S-93-639: (NEMA WC 74) 5-46 KV Shielded Power Cable
- ICEA S-97-682: Standard for Shielded Utility Cable Rated for 5 - 46kV
- AEIC CS-8: Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)
- Made in America:: Compliant with both Buy American and Buy America Act (BAA) requirements per 49 U.S.C. § 5323(j) and the Federal Transit Administration Buy America requirements per 49 C.F.R. part 661
Construction
- Conductor: Class B compact stranded 8000 Series aluminum per ASTM B800 and ASTM B836
- Conductor Shield: Semi-conducting cross-linked copolymer; A conductor separator is used for cable size larger than or equal to 500 Kcmil
- Insulation: 115 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 133% Insulation Level,
- Insulation Shield: Strippable semi-conducting cross-linked copolymer
- Copper Tape Shield: Helically wrapped 5 mil copper tape with 25% overlap
- Grounding Conductor: Class B compressed stranded bare copper ground per ASTM B3 and ASTM B8
- Filler: Wax paper filler
- Binder: Polypropylene tape
- Armor: Aluminum Interlocked Armor (AIA)
- Overall Jacket: Polyvinyl Chloride (PVC)
Resources
There are no downloadable resources for this product.