Rated 5 out of
5
by
Joemama from
It's a multimeter
I bought this 2 years ago and it's still a multimeter. I haven't had to change the batteries
Date published: 2016-08-28
Bazaarvoice SAP Hybris Integration Version 2.8.2
I lost the the Battery cover. Is there any way to order one?
Asked by: Elisha115
We do not sell these separately.
Answered by: Southwire
Date published: 2021-02-11
How do I test batteries with the 10020N multimeterÉ
Asked by: Miner
Page 6 of the attached manual shows instructions for checking AC / DC Voltage. For batteries, it would be DC Voltage.
Answered by: swtools
Date published: 2019-08-18
What setting is for volts
Asked by: Ray ray
The setting with ‘V’ is for Volts. This is the Blue-labeled section on the multimeter.
If you want to test AC Voltage, you may need to push the red ‘Mode’ button until ‘AC’ is displayed on left side of the screen. The ‘V’ for voltage will be displayed on the right side of the screen.
If you want to test DC Voltage, you may need to push the red ‘Mode’ button until ‘DC’ is displayed on left side of the screen. The ‘V’ for voltage will be displayed on the right side of the screen.
Answered by: SouthwireTools
Date published: 2017-09-01
The previous question ask about reseting the fuse. You answered "there is no resetable fuse" but it says right on the device "resetable fuse". I'm confused.
Asked by: PoolMan
Please contact our customer service team at 1-855-798-6657 and they will assist you. Thank you.
Answered by: SouthwireTools
Date published: 2017-04-03
I have a this meter. I am trying to discover if the fuse just needs resetting or if the entire meter has gone bad. How does one reset the fuse within the meter?
Asked by: LadyElisabeth
These are not resettable fuses. You can validate if the fuse is blown by testing the fuse in the continuity setting.
Answered by: SouthwireTools
Date published: 2019-08-18
Bazaarvoice SAP Hybris Integration Version 2.8.2
