Application
Southwire’s 2000 Volt power cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short circuit conditions.
Specifications
To see specifications for this product, visit the CableTechSupport™ Services website.
Standards & References
- ASTM B3: Soft or Annealed Copper Wire
- ASTM B8: Concentric-Lay-Stranded Copper Conductors
- ASTM B787: 19 Wire Combination Unilay-Stranded Copper Conductors
- UL 44: Thermoset-Insulated Wires and Cables
- UL 4703: Standard for Photovoltaic Wire
- Made in America:: Compliant with both Buy American and Buy America Act (BAA) requirements per 49 U.S.C. § 5323(j) and the Federal Transit Administration Buy America requirements per 49 C.F.R. part 661
- VW-1: Vertical-Wire Flame Test (Optional)
Construction
- Conductor: Stranded bare copper per ASTM B3 and ASTM B8 or ASTM B787
- Insulation: Cross Linked Polyethylene (XLPE). Colors available upon request.
Resources
There are no downloadable resources for this product.