SPEC 44122 4/C CU 2000V EPDM/CPE Type G Industrial Grade Cable 90°C. MSHA Approved
Flexible Copper conductors, Ethylene Propylene Diene Monomer (EPDM) insulation, Single Layer Chlorinated Polyethylene (CPE) Jacket
Download Category Specifications
PDF
Application
Southwire Type G cable is a heavy-duty industrial cable for use in flexible, portable, and extra-hard usage applications where equipment grounding is required per NEC Article 400. Suitable for continuous submersion in water – ideal for submersible pumps, marine application. Also suitable for use in light to medium-duty mining applications. Sunlight and oil resistant. Highly flexible and easy to work with in cold conditions. Not for use as permanent building wiring. Meets FT-5 Flame Test. cUL Listed.
Specifications
To browse SKUs, select from the following:
To see specifications for this product, visit the CableTechSupport™ Services website.
Standards & References
- ASTM B3: Soft or Annealed Copper Wire
- ASTM B172: Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Copper Conductors
- UL 1650: Standard for Portable Power Cable
- MSHA: Approved
- RoHS-2: (European Directive 2011/65/EU)
Construction
- Conductor: Bare, soft drawn, annealed, flexible, rope-lay stranded copper per ASTM B3/B172
- Separator Tape: Non-conducting tape applied between the conductor and insulation to facilitate stripping
- Insulation: Ethylene Propylene Diene Monomer (EPDM). Color coded black, white, blue, red for sizes #4/0 and smaller and black, white, red, orange for sizes over 250 kcmil
- Ground Conductors: Four insulated, bare, soft drawn, annealed, rope stranded, flexible lay copper per ASTM B3/B172
- Fillers: Jute fillers applied as needed to round the cable core
- Reinforcement Binder: Reinforcing binder with twine applied over the core
- Jacket: Black, flame resistant, thermosetting Chlorinated Polyethylene (CPE)
Resources
There are no downloadable resources for this product.