SPEC 45442 CU 600V XLPE Insulation Shielded TPE jacket. XHHW-2 Reduced Diameter Flexible Variable Frequency Drive (VFD)

Reduced Diameter Type TC-ER Variable Frequency Drive Cable, 600 Volts or 1000 Volts, Tinned Copper Conductors, Crosslinked Insulation Type XHHW-2, Thermoplastic Elastomer Jacket, Rated 90°C Dry or Wet, -40°C Cold Impact, Identification Method 4. 1000 Volts Flexible Motor Supply. CSA CIC/TC FT4 Flame.

Download Category Specifications

Application

Applications and Features: Power supply cable for VFDs and motors, suitable for cable tray, conduit, raceways, exposed run (TC-ER) and conforming to NFPA 79 2018. Suitable for free air and direct burial. Its flexible design is ideal for use on operation processes in accordance with NEC® Articles 336, 501 and 502 including, but not limited to: fans, pumps, conveyors, compressors, elevators and lifts, extruders, crushers and presses, assembly lines, food and beverage, wind energy and data centers. Cable is rated for -40C Cold Bend and Impact. Multiple approvals for multiple applications.

Specifications

Select a set of products below for more information:

	Conductor				Ground Wire
	No. of Conductors	Size (AWG or kcmil) (mm2)	No. of Strands	Insulation Thickness (mils) (mm)	Size (AWG)	No. of Strands	Nom. OD (mils) (mm)	Nominal Total Weight (lbs/1000') (kgs/km)	Allowable Ampacity
645824	4 4	16 AWG 16 AWG	26 26	30 0.76	16 16		408 10.37	113 167
645825	4 4	14 AWG 14 AWG	41 41	30 0.76	14 14		444 11.29	146 217
645826	4 4	12 AWG 12 AWG	65 65	30 0.76	12 12		490 12.45	196 292
645827	4 4	10 AWG 10 AWG	105 105	30 0.76	10 10		590 15.01	292 435
677299	4 4	8 AWG 8 AWG	168 168	45 1.14	14 14		773 19.66	469 698

Standards & References

ASTM B33: Standard Specification for Tin-Coated Soft or Annealed Copper Wire
ASTM B172: Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Copper Conductors
ASTM B174: Standard Specification for Bunch-Stranded Copper
UL 44: Thermoset-Insulated Wires and Cables
UL 758: Standard for Appliance Wiring Material Style 20886
UL 1277: Type TC-ER Standard Power and Control Cables (1000V 14AWG and Larger)
UL 2277: Flexible Motor Supply Cable and Wind Turbine Tray Cable
CSA C22.2 No. 210: Appliance wiring material products I/II A/B (Sizes 16 - 8AWG)
CSA C22.2 No.230: Tray Cables - Rated TC
CSA C22.2 No. 239: Control and instrumentation cables
CE/RoHS-2: – The CE Marking has been applied solely to express the conformance to the material restrictions identified in the RoHS-2 (2011/65/EU) Directive
Made in America:: Compliant with both Buy American and Buy America Act (BAA) requirements per 49 U.S.C. § 5323(j) and the Federal Transit Administration Buy America requirements per 49 C.F.R. part 661

Construction

Conductor: Class K, flexible stranded tinned annealed copper per ASTM B3, B172, and B174
Insulation: Cross linked insulation on all conductors (Type XHHW-2 on 14 AWG and larger)
Ground: One green ground with yellow Stripe cross linked insulation (size equal to phase conductor)
Drain Wire: Tinned copper drain wire
Shielding: 100% coverage aluminum/Mylar/aluminum foil, overall 85% coverage tinned copper braid
Jacket: Black Thermoplastic Elastomer (TPE)