SPEC 45059 TCU 600 EPR Insulation Thermoplastic CPE-TP Jacket XHHW-2. CT Rated - Sunlight Resistant - For Direct Burial - Silicone Free

Type TC-ER Control Cable 600Volt Tinned Copper Conductors, Ethylene Propylene Rubber (EPR) Insulation XHHW-2 Thermoplastic Chlorinated Polyethylene (CPE-TP) Jacket, Control Cable Conductor Identification Method 1 Table 1. CT Rated - Sunlight Resistant - Oil Resistant - For Direct Burial - VW-1 rated - Silicone Free

Download Category Specifications
Excel Table

Application

Southwire’s 600 Volt Type TC-ER control cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short circuit conditions. For uses in Class I, II, and III, Division 2 hazardous locations per NEC Article 501 and 502. Constructions with 3 or more conductors are listed for exposed runs (TC-ER) per NEC 336.10. VW-1 rated - Sunlight Resistant - Oil Resistant - For Direct Burial - Silicone Free

Specifications

Select a set of products below for more information:
Conductor Ground Wire
No. of Conductors Size (AWG or kcmil) (mm2) No. of Strands Insulation Thickness (mils) (mm) Size (AWG) No. of Strands Nom. OD (mils) (mm) Nominal Total Weight (lbs/1000') (kgs/km) Allowable Ampacity
599457
3 3
14 AWG 14 AWG
7 7
30 0.76
388 9.86
86 128
599458
4 4
14 AWG 14 AWG
7 7
30 0.76
423 10.74
108 161
599459
5 5
14 AWG 14 AWG
7 7
30 0.76
461 11.71
130 193
595479
7 7
14 AWG 14 AWG
7 7
30 0.76
502 12.75
171 254
599460
9 9
14 AWG 14 AWG
7 7
30 0.76
616 15.65
233 346
599461
12 12
14 AWG 14 AWG
7 7
30 0.76
692 17.58
299 446
595475
19 19
14 AWG 14 AWG
7 7
30 0.76
804 20.42
434 646
595635
2 2
12 AWG 12 AWG
7 7
30 0.76
466 11.84
86 129
595636
4 4
12 AWG 12 AWG
7 7
30 0.76
466 11.84
148 221
592111
5 5
12 AWG 12 AWG
7 7
30 0.76
543 13.79
198 295
596919
9 9
12 AWG 12 AWG
7 7
31 0.79
589 14.96
319 475
595477
12 12
12 AWG 12 AWG
7 7
30 0.76
466 11.84
410 611
595632
2 2
10 AWG 10 AWG
7 7
30 0.76
466 11.84
117 174
595556
3 3
10 AWG 10 AWG
7 7
30 0.76
478 12.14
162 241
595633
4 4
10 AWG 10 AWG
7 7
30 0.76
556 14.12
223 332
645726
12 12
10 AWG 10 AWG
7 7
32 0.81
466 11.84
616 916

Standards & References

  • ASTM B3: Soft or Annealed Copper Wire
  • ASTM B8: Concentric-Lay-Stranded Copper Conductors
  • ASTM B33: Standard Specification for Tin-Coated Soft or Annealed Copper Wire
  • UL 44: Thermoset-Insulated Wires and Cables
  • UL 44: VW-1 Vertical flame test on individual conductors
  • UL 1277: Electrical Power and Control Tray Cables
  • UL 1685: FT4 Vertical-Tray Fire Propagation and Smoke Release Test
  • ICEA S-58-679: Control Cable Conductor Identification Method 1 Table 1
  • ICEA S-73-532: Standard for Control, Thermocouple Extension and Instrumentation Cables
  • ICEA S-95-658: (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
  • IEEE 1202: FT4 Flame Test (70,000) BTU/hr Vertical Tray Test

Construction

  • Conductor: 7 strands class B compressed tinned copper per ASTM B33 and ASTM B8
  • Insulation: Ethylene Propylene Rubber (EPR) XHHW-2, 30 Mils thick for all cable sizes
  • Overall Jacket: Thermoplastic Chlorinated Polyethylene (CPE-TP) Jacket

Resources

There are no downloadable resources for this product.