SPEC 45051 CU 600V PVC-Nylon Insulation PVC Jacket THHN/THWN-2. CT Rated - Sunlight Resistant - For Direct Burial - Silicone Free

Type TC-ER Control Cable 600 Volt Copper Conductors, Polyvinyl Chloride (PVC) with nylon layer Insulation THHN or TFFN/TFN Polyvinyl Chloride (PVC) Jacket, Control Cable Conductor Identification Method 1 Table 2. CT Rated - Sunlight Resistant - For Direct Burial - Silicone Free - VW-1 Rated.

Download Category Specifications
Excel Table

Application

Southwire’s 600 Volt Type TC-ER control cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 75°C in wet locations and 90°C in dry locations, 105°C for emergency overload, and 150°C for short circuit conditions. For uses in Class I, II, and III, Division 2 hazardous locations per NEC Article 501 and 502. Constructions with 3 or more conductors are listed for exposed runs (TC-ER) per NEC 336.10. Sunlight Resistant - For Direct Burial - Silicone Free - VW-1 Rated.

Specifications

Select a set of products below for more information:
Conductor Ground Wire
No. of Conductors Size (AWG or kcmil) (mm2) No. of Strands Insulation Thickness (mils) (mm) Size (AWG) No. of Strands Nom. OD (mils) (mm) Nominal Total Weight (lbs/1000') (kgs/km) Allowable Ampacity
604843
2 2
16 AWG 16 AWG
26 26
15 0.38
292 7.42
45 67
604850
3 3
16 AWG 16 AWG
26 26
15 0.38
308 7.83
58 86
604868
4 4
16 AWG 16 AWG
26 26
15 0.38
333 8.48
70 104
604876
5 5
16 AWG 16 AWG
26 26
15 0.38
362 9.21
82 122
604892
7 7
16 AWG 16 AWG
26 26
15 0.38
393 9.98
108 161
604918
9 9
16 AWG 16 AWG
26 26
15 0.38
454 11.55
135 201
604942
12 12
16 AWG 16 AWG
26 26
15 0.38
510 12.96
175 260
604975
15 15
16 AWG 16 AWG
26 26
15 0.38
595 15.13
227 337
605014
19 19
16 AWG 16 AWG
26 26
15 0.38
625 15.88
275 409
605071
25 25
16 AWG 16 AWG
26 26
15 0.38
700 17.78
350 521
605121
30 30
16 AWG 16 AWG
26 26
15 0.38
767 19.49
413 614
605196
37 37
16 AWG 16 AWG
26 26
15 0.38
867 22.02
529 788
408484
2 2
14 AWG 14 AWG
7 7
15 0.38
305 7.75
56 84
408518
3 3
14 AWG 14 AWG
7 7
15 0.38
322 8.19
75 111
408542
4 4
14 AWG 14 AWG
7 7
15 0.38
351 8.94
95 141
408575
5 5
14 AWG 14 AWG
7 7
15 0.38
380 9.66
110 164
608836
6 6
14 AWG 14 AWG
7 7
15 0.38
416 10.59
130 194
408633
7 7
14 AWG 14 AWG
7 7
15 0.38
412 10.49
146 217
408740
9 9
14 AWG 14 AWG
7 7
15 0.38
490 12.45
190 282
605477
10 10
14 AWG 14 AWG
7 7
15 0.38
572 14.54
229 340
408807
12 12
14 AWG 14 AWG
7 7
15 0.38
573 14.57
257 382
412874
15 15
14 AWG 14 AWG
7 7
15 0.38
632 16.07
313 466
412908
19 19
14 AWG 14 AWG
7 7
15 0.38
690 17.53
396 589
608729
20 20
14 AWG 14 AWG
7 7
15 0.38
725 18.42
417 620
552133
25 25
14 AWG 14 AWG
7 7
15 0.38
802 20.39
507 755
552190
37 37
14 AWG 14 AWG
7 7
15 0.38
949 24.11
760 1131
408468
2 2
12 AWG 12 AWG
7 7
15 0.38
348 8.85
77 115
408526
3 3
12 AWG 12 AWG
7 7
15 0.38
369 9.38
109 162
408559
4 4
12 AWG 12 AWG
7 7
15 0.38
401 10.21
150 223
408583
5 5
12 AWG 12 AWG
7 7
15 0.38
438 11.15
183 273
608737
6 6
12 AWG 12 AWG
7 7
15 0.38
481 12.23
190 282
408641
7 7
12 AWG 12 AWG
7 7
15 0.38
477 12.13
238 354
408757
9 9
12 AWG 12 AWG
7 7
15 0.38
580 14.73
332 494
408815
12 12
12 AWG 12 AWG
7 7
15 0.38
657 16.70
425 633
412882
15 15
12 AWG 12 AWG
7 7
15 0.38
734 18.66
455 677
412916
19 19
12 AWG 12 AWG
7 7
15 0.38
772 19.61
563 837
552166
25 25
12 AWG 12 AWG
7 7
15 0.38
943 23.96
762 1134
552224
37 37
12 AWG 12 AWG
7 7
15 0.38
1064 27.04
1084 1613
408492
2 2
10 AWG 10 AWG
7 7
20 0.51
420 10.67
115 172
408534
3 3
10 AWG 10 AWG
7 7
20 0.51
446 11.34
160 238
408567
4 4
10 AWG 10 AWG
7 7
20 0.51
505 12.83
208 309
408591
5 5
10 AWG 10 AWG
7 7
20 0.51
565 14.36
258 384
408658
7 7
10 AWG 10 AWG
7 7
20 0.51
615 15.62
381 567
408765
9 9
10 AWG 10 AWG
7 7
20 0.51
715 18.18
502 747
408823
12 12
10 AWG 10 AWG
7 7
20 0.51
806 20.48
653 971
601666
19 19
10 AWG 10 AWG
7 7
20 0.51
993 25.22
904 1345

Standards & References

  • ASTM B3: Soft or Annealed Copper Wire
  • ASTM B8: Concentric-Lay-Stranded Copper Conductors
  • UL 66: Fixture Wire
  • UL 83: Thermoplastic Insulated Wires and Cables
  • UL 1277: Electrical Power and Control Tray Cables
  • UL 1685: Vertical-Tray Fire Propagation and Smoke Release Test
  • ICEA S-58-679: Control Cable Conductor Identification Method 1 Table 2
  • ICEA S-73-532: Standard for Control, Thermocouple Extension and Instrumentation Cables
  • ICEA S-95-658: (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
  • IEEE 1202: FT4 Flame Test (70,000) BTU/hr Vertical Tray Test

Construction

  • Conductor: 7 strands class B compressed bare copper per ASTM B3 and ASTM B8 for 14, 12, and 10 AWG cables. Class K bare copper per ASTM B3 and B174 for 16 AWG (26 strands) and 18 AWG (16 strands) cables
  • Insulation: Polyvinyl Chloride (PVC) with nylon layer. Type TFFN/TFN for 18 and 16 AWG cable. Type THHN or THWN-2 for 14, 12 , 10 AWG cables. Types THHN or THWN-2 are VW-1 Rated
  • Filler: Polypropylene filler on cables with 5 or less conductors
  • Binder: Polyester flat thread binder tape applied for cables with more than 5 conductors
  • Overall Jacket: Polyvinyl Chloride (PVC) Jacket

Resources

There are no downloadable resources for this product.