SPEC 46710 AL Compact 35kV NLEPR Insulation 133% IL Black SIM-PVC Jacket. MV 105 - Tray Rated - Sunlight Resistant - For Direct Burial
Type MV-105 Single Conductor Aluminum, 420 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 133% Insulation Level, Tape Shield, SIMpull Polyvinyl Chloride (PVC) Jacket, Dual Rated UL/CSA
Application
Southwire’s 35KV cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial when installed with a grounding conductor in close proximity that conforms to NEC section 311.36 and 250.4(A)(5), and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated at -35°C for cold bend when UL listed. Rated at -25°C for cold bend and cold impact and marked with "LTDD" when CSA listed or dual UL/CSA listed. PVC jacket is made with SIM technology and has a coefficient of friction COF of 0.2. Cable can be installed in conduit without the aid of lubrication. Rated for 1000 lbs./FT maximum sidewall pressure.
Specifications
| Conductor | Ground Wire | ||||||||
| No. of Conductors | Size (AWG or kcmil) (mm2) | No. of Strands | Insulation Thickness (mils) (mm) | Size (AWG) | No. of Strands | Nom. OD (mils) (mm) | Nominal Total Weight (lbs/1000') (kgs/km) | Allowable Ampacity | |
| 566994 |
1
1
|
1/0 AWG
1/0 AWG
|
10
10
|
420
10.67
|
|
|
1454
36.93
|
999
1487
|
|
| 590621 |
1
1
|
2/0 AWG
2/0 AWG
|
12
12
|
420
10.67
|
|
|
1494
37.95
|
1064
1583
|
|
| 566995 |
1
1
|
3/0 AWG
3/0 AWG
|
15
15
|
420
10.67
|
|
|
1541
39.14
|
1142
1699
|
|
| 591197 |
1
1
|
4/0 AWG
4/0 AWG
|
19
19
|
420
10.67
|
|
|
1593
40.46
|
1233
1836
|
|
| 591198 |
1
1
|
250 KCMIL
250 KCMIL
|
22
22
|
420
10.67
|
|
|
1646
41.81
|
1323
1969
|
|
| 591199 |
1
1
|
350 KCMIL
350 KCMIL
|
35
35
|
420
10.67
|
|
|
1802
45.77
|
1612
2398
|
|
| 578178 |
1
1
|
500 KCMIL
500 KCMIL
|
35
35
|
420
10.67
|
|
|
1944
49.38
|
1900
2827
|
|
| 566996 |
1
1
|
750 KCMIL
750 KCMIL
|
58
58
|
420
10.67
|
|
|
2126
54.00
|
2340
3482
|
|
| 597787 |
1
1
|
1000 KCMIL
1000 KCMIL
|
58
58
|
420
10.67
|
|
|
2278
57.86
|
2723
4052
|
|
| 677472 |
1
1
|
1250 KCMIL
1250 KCMIL
|
91
91
|
420
10.67
|
|
|
2471
62.76
|
3175
4724
|
|
Standards & References
- ASTM B801: Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy
- ASTM B836: Compact Rounded Stranded Aluminum Conductors
- UL 1072: Medium-Voltage Power Cables
- UL 1685: FT4 Vertical-Tray Fire Propagation and Smoke Release Test (1/0 and Larger)
- CSA C22.2 No.230: Tray Cables - Rated TC-ER (1/0 AWG and Larger)
- CSA C22.2 No. 2556 / UL 2556: Cable Test Methods
- CSA C68.10: Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV
- ICEA S-93-639: (NEMA WC 74) 5-46 KV Shielded Power Cable
- IEEE 1202: FT4 Flame Test (70,000) BTU/hr Vertical Tray Test (1/0 and Larger)
- AEIC CS-8: Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)
- Made in America:: Compliant with both Buy American and Buy America Act (BAA) requirements per 49 U.S.C. § 5323(j) and the Federal Transit Administration Buy America requirements per 49 C.F.R. part 661
Construction
- Conductor: Class B compact stranded 8000 Series aluminum per ASTM B800 and ASTM B836
- Conductor Shield: Semi-conducting cross-linked copolymer; A conductor separator is used for cable size larger than or equal to 500 Kcmil
- Insulation: 420 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 133% Insulation Level,
- Insulation Shield: Strippable semi-conducting cross-linked copolymer
- Copper Tape Shield: Helically wrapped 5 mil copper tape with 25% overlap
- Overall Jacket: Polyvinyl Chloride (PVC)
Resources
Related Products
