SPEC 46453 CU Compressed 15kV NLEPR Insulation 133% IL AIA Red PVC Jacket. MV 105 - Tray Rated - Sunlight Resistant - For Direct Burial
Type MV-105 Three Conductor Copper, 220 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 133% Insulation Level, Tape Shield, Aluminum Interlocked Armor (AIA), Polyvinyl Chloride (PVC) Jacket. Type MC For Cable Tray Use - Sunlight Resistant. Silicone Free
Application
Southwire’s 15KV cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated at -35°C for cold bend when UL listed. Rated at -40°C for cold bend and cold impact and marked with "LTGG" when CSA listed or dual UL/CSA listed. For uses in Class I and II, Division 2 hazardous locations per NEC Article 501 and 502.Rated for 1000 lbs./FT maximum sidewall pressure.
Specifications
Select a set of products below for more information:
| Conductor | Ground Wire | ||||||||
| No. of Conductors | Size (AWG or kcmil) (mm2) | No. of Strands | Insulation Thickness (mils) (mm) | Size (AWG) | No. of Strands | Nom. OD (mils) (mm) | Nominal Total Weight (lbs/1000') (kgs/km) | Allowable Ampacity | |
| 551671 |
3
3
|
2 AWG
2 AWG
|
7
7
|
220
5.59
|
6
6
|
|
2250
57.15
|
2437
3626
|
|
| 556951 |
3
3
|
1/0 AWG
1/0 AWG
|
19
19
|
220
5.59
|
4
4
|
|
2471
62.79
|
3171
4718
|
|
| 957886 |
3
3
|
2/0 AWG
2/0 AWG
|
19
19
|
220
5.59
|
4
4
|
|
2562
65.09
|
3543
5273
|
|
| 551648 |
3
3
|
4/0 AWG
4/0 AWG
|
19
19
|
220
5.59
|
3
3
|
|
2761
70.14
|
4590
6831
|
|
| 447276 |
3
3
|
250 KCMIL
250 KCMIL
|
37
37
|
220
5.59
|
2
2
|
|
2873
72.99
|
5537
8241
|
|
| 551614 |
3
3
|
350 KCMIL
350 KCMIL
|
37
37
|
220
5.59
|
2
2
|
|
3130
79.52
|
6502
9676
|
|
| 409169 |
3
3
|
500 KCMIL
500 KCMIL
|
37
37
|
220
5.59
|
1
1
|
|
3429
87.10
|
8194
12194
|
|
| 556977 |
3
3
|
750 KCMIL
750 KCMIL
|
61
61
|
220
5.59
|
1/0
1/0
|
|
3837
97.47
|
11461
17055
|
|
Standards & References
- ASTM B3: Soft or Annealed Copper Wire
- ASTM B8: Concentric-Lay-Stranded Copper Conductors
- ASTM B33: Standard Specification for Tin-Coated Soft or Annealed Copper Wire
- UL 1072: Medium-Voltage Power Cables
- UL 1685: Vertical-Tray Fire Propagation and Smoke Release Test
- ICEA S-93-639: (NEMA WC 74) 5-46 KV Shielded Power Cable
- AEIC CS-8: Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)
- Made in America:: Compliant with both Buy American and Buy America Act (BAA) requirements per 49 U.S.C. § 5323(j) and the Federal Transit Administration Buy America requirements per 49 C.F.R. part 661
Construction
- Conductor: Class B compressed stranded bare copper per ASTM B3 and ASTM B8 (Tinned Copper per ASTM B33 optional)
- Conductor Shield: Semi-conducting cross-linked copolymer
- Insulation: 220 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 133% Insulation Level,
- Insulation Shield: Strippable semi-conducting cross-linked copolymer
- Copper Tape Shield: Helically wrapped 5 mil copper tape with 25% overlap
- Grounding Conductor: Class B compressed stranded bare copper ground per ASTM B3 and ASTM B8 (Tinned Copper per ASTM B33 optional)
- Filler: Wax paper filler
- Binder: Polypropylene tape
- Armor: Aluminum Interlocked Armor (AIA)
- Overall Jacket: Polyvinyl Chloride (PVC)
Resources
There are no downloadable resources for this product.