SPEC 45201 CU 600V XLPE Insulation AIA PVC Jacket XHHW-2. CT Rated - Sunlight Resistant - For Direct Burial - Silicone Free
Type MC Control Cable 600Volt Copper Conductors, Cross Linked Polyethylene (XLPE) Insulation XHHW-2 Aluminum Interlocked Armor (AIA), Polyvinyl Chloride (PVC) Jacket.
Application
Southwire’s 600 Volt Type MC control cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short circuit conditions. For uses in Class I, II, and III, Division 2 hazardous locations per NEC Article 501 and 502.
Specifications
Select a set of products below for more information:
| Conductor | Ground Wire | ||||||||
| No. of Conductors | Size (AWG or kcmil) (mm2) | No. of Strands | Insulation Thickness (mils) (mm) | Size (AWG) | No. of Strands | Nom. OD (mils) (mm) | Nominal Total Weight (lbs/1000') (kgs/km) | Allowable Ampacity | |
| 555413 |
3
3
|
14 AWG
14 AWG
|
7
7
|
30
0.76
|
|
|
640
16.27
|
200
297
|
|
| 578426 |
2
2
|
12 AWG
12 AWG
|
7
7
|
30
0.76
|
|
|
620
15.76
|
194
288
|
|
| 555149 |
3
3
|
12 AWG
12 AWG
|
7
7
|
30
0.76
|
|
|
653
16.61
|
227
338
|
|
| 573502 |
4
4
|
12 AWG
12 AWG
|
7
7
|
30
0.76
|
|
|
683
17.35
|
262
389
|
|
| 568457 |
2
2
|
10 AWG
10 AWG
|
7
7
|
30
0.76
|
|
|
672
17.07
|
251
373
|
|
| 568458 |
3
3
|
10 AWG
10 AWG
|
7
7
|
30
0.76
|
|
|
703
17.86
|
297
442
|
|
| 573500 |
4
4
|
10 AWG
10 AWG
|
7
7
|
30
0.76
|
|
|
745
18.93
|
341
508
|
|
Standards & References
- ASTM B3: Soft or Annealed Copper Wire
- ASTM B8: Concentric-Lay-Stranded Copper Conductors
- UL 44: Thermoset-Insulated Wires and Cables
- UL 1569: Metal-Clad Cables
- UL 1685: Vertical-Tray Fire Propagation and Smoke Release Test
- ICEA S-58-679: Control Cable Conductor Identification Method 1 Table 2
- ICEA S-73-532: Standard for Control, Thermocouple Extension and Instrumentation Cables
- ICEA S-95-658: (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
Construction
- Conductor: 7 strands class B compressed tinned copper per ASTM B33 and ASTM B8
- Insulation: Cross Linked Polyethylene (XLPE) XHHW-2, 30 Mils thick for all cable sizes
- Grounding Conductor: Class B compressed stranded bare copper
- Filler: Polypropylene filler on cables with 5 or less conductors
- Binder: Polyester flat thread binder tape applied for cables with more than 5 conductors
- Armor: Aluminum Interlocked Armor (AIA)
- Overall Jacket: Polyvinyl Chloride (PVC) Jacket
Resources
There are no downloadable resources for this product.