SPEC 25010 CSA TECK 90 CU 1000V NON-SHIELDED XLPE POWER CABLE

1000V, Non-Shielded, XLPE Insulation, FT4, -40°C, HL (Hazardous Locations), 90°C

Download Category Specifications

Application

Southwire's Single Conductor 1kV Teck 90 is a CSA approved armoured cable for Industrial and Commercial applications. FT4, -40C, HL, AG14 and 90°C rated for use in harsh Canadian environments. Rated for installation in cable trays, duct banks, direct burial, troughs, hazardous locations, continuous rigid cable supports, and concrete encaseable. CSA AG14 Acid Gas compliance. -40°C - CSA Cold Bend and Impact Temperature -25°C - Min. Installation Temperature 90°C - Max. Continuous Operating Temperature 140°C for Emergency Overload Temperature

Specifications

Select a set of products below for more information:

	Conductor				Ground Wire
	No. of Conductors	Size (AWG or kcmil) (mm2)	No. of Strands	Insulation Thickness (mils) (mm)	Size (AWG)	No. of Strands	Nom. OD (mils) (mm)	Nominal Total Weight (lbs/1000') (kgs/km)	Allowable Ampacity
597824	1 1	4/0 AWG 4/0 AWG	19 19	80 2.03			1311 33.30	1272 1892
586405	1 1	350 KCMIL 350 KCMIL	37 37	90 2.29			1539 39.11	1936 2880
581915	1 1	500 KCMIL 500 KCMIL	37 37	90 2.29			1684 42.79	2579 3838
576233	1 1	750 KCMIL 750 KCMIL	61 61	90 2.29			1881 47.78	3573 5317

Standards & References

ASTM B3: Soft or Annealed Copper Wire
ASTM B8: Concentric-Lay-Stranded Copper Conductors
CSA C22.2 No. 174: Cables in Hazardous Locations
CSA C22.2 No. 131: Type TECK 90 Cable
CSA C22.2 No. 2556 & No. 0.3: Wire and Cable Test Methods
CSA: LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating
CSA: HL - for Hazardous Locations rating
CSA: SUN RES - for Sunlight Resistant rating
CSA: AG14 - Acid Gas Compliance
ICEA S-96-659: (NEMA WC 71) 2001-5000 V Nonshielded Cables
IEEE 1202: FT4 Flame Test (70,000) BTU/hr Vertical Tray Test
FT1: Flame Test (1,706 BTU/Hr nominal - Vertical Wire Flame Test)

Construction

Conductor: Class B stranded compressed copper in accordance with ASTM B3 and ASTM B8
Insulation: XLPE (Cross Linked Polyethylene), Minimum Average Thickness: 4/0 = 0.08 inches (2.03 mm), 250 kcmil to 1000 kcmil = 0.090 inches (2.3 mm), 90°C
Concentric Bonding Conductors: Class B, concentric bare copper wire serve
Binder: Polypropylene Separator
Inner Jacket: Black PVC, Minumum average thickness - 4/0 = 0.050" (1.27mm), 250 kcmil to 1000 kcmil = 0.060" (1.5 mm)
Armor: Aluminum Interlocked Armour (AIA)
Overall Jacket: Black PVC (optional colours available), Minimum Thickness: 4/0 to 400 kcmil = 0.050 inches (1.3 mm), 500 kcmil to 1000 kcmil = 0.060 inches (1.5 mm)

Resources

There are no downloadable resources for this product.