1/0-19 3/C CU RHH-RHW-2 3x6 GW T/S PVC JKT TC-ER 2000V VFD 5000 FT

Southwire #: 64433389

Download Category Specifications

PDF Excel Table

Select Product Specifications

Construction

Outer Jacket / Armor Color

Conductor Color

Packaging

Application

Southwire’s 600 Volt Type TC-ER control cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short circuit conditions. For uses in Class I, II, and III, Division 2 hazardous locations per NEC Article 501 and 502. Exposed runs (TC-ER) per NEC 336.10. VW-1 Rated.

Specifications

Stock #	64433389 64433389
No. of Conductors	3 3
Size (AWG or kcmil) (mm2)	1/0 AWG 1/0 AWG
No. of Strands	19 19
Insulation Thickness (mils) (mm)	90 2.29	mils mm
Size (AWG)	6 6
Nom. OD (mils) (mm)	1380 35.06	mils mm
Nominal Total Weight (lbs/1000') (kgs/km)	1858 2765	lbs/1000' kgs/km

Standards & References

ASTM B8 Concentric-Lay-Stranded Copper Conductors
ASTM B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire
UL 44 Thermoset-Insulated Wires and Cables
UL 1277 Electrical Power and Control Tray Cables
UL 1685 FT4 Vertical-Tray Fire Propagation and Smoke Release Test
ICEA S-58-679 Control Cable Conductor Identification Method 1 Table 2
ICEA S-73-532 Standard for Control, Thermocouple Extension and Instrumentation Cables
ICEA S-95-658 (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test