TCC 2-7 4C Stc 600V EP 1x6Cg CPE Bk 6kR

Southwire #: 59198889

Download Category Specifications

Excel Table

Select Product Specifications

Construction

Outer Jacket / Armor Color

Conductor Color

Packaging

Application

Southwire’s 600 Volt Type TC-ER control cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short circuit conditions. For uses in Class I, II, and III, Division 2 hazardous locations per NEC Article 501 and 502. Exposed runs (TC-ER) per NEC 336.10. VW-1 Rated.

Specifications

Stock #	59198889 59198889
No. of Conductors	4 4
Size (AWG or kcmil) (mm2)	2 AWG 2 AWG
No. of Strands	7 7
Insulation Thickness (mils) (mm)	45 1.14	mils mm
Size (AWG)	6 6
Nom. OD (mils) (mm)	1123 28.52	mils mm
Nominal Total Weight (lbs/1000') (kgs/km)	1214 1807	lbs/1000' kgs/km

Standards & References

ASTM B8 Concentric-Lay-Stranded Copper Conductors
ASTM B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire
UL 44 Thermoset-Insulated Wires and Cables
UL 1277 Electrical Power and Control Tray Cables
UL 1685 FT4 Vertical-Tray Fire Propagation and Smoke Release Test
ICEA S-58-679 Control Cable Conductor Identification Method 1 Table 2
ICEA S-73-532 Standard for Control, Thermocouple Extension and Instrumentation Cables
ICEA S-95-658 (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test