3/C CU 5KV Type SHD-GC RHINOSHIELD™ CPE Mining Cable 90°C
Flexible Copper conductors, EPR 100% Insulation Level, Cu/Nylon Braid Shield, Extra Heavy Duty Two Layer Chlorinated Polyethylene (CPE) Jacket with Optional Reflective Stripes
Application
RHINOSHIELDTM Type SHD-GC is a heavy-duty trailing cable where flexibility and maximum protection is required. For use with mobile, reeling, or stationary mining equipment, continuous mining machines, longwall mining systems, and blast hole drillers. It is also an ex- cellent choice for shovels, draglines, dredges, cranes and marine shore-to-ship power supplies, and anytime extra-durable, flexible cable is required. Suitable for continuous submersion in water. Ground check conductor provides fail-safe ground monitoring. Embossed print legend for easy cable identification. Cold Bend and Impact Tested to -50°C.
Select a set of products below for more information:
| Conductor | Ground Wire | ||||||||
| No. of Conductors | Size (AWG or kcmil) | No. of Strands | Insulation Thickness (mils) (mm) | Size (AWG) | No. of Strands | Nom. OD (mils) (mm) | Nominal Total Weight (lbs/1000') (kgs/km) | Allowable Ampacity | |
| 571484 | 3 3 | 6 AWG 6 AWG | 133 133 | 110 2.79 | 10 10 | 1588 40.34 | 1236 1839 | ||
| 589075 | 3 3 | 4 AWG 4 AWG | 259 259 | 110 2.79 | 8 8 | 1739 44.17 | 1697 2526 | ||
| 587171 | 3 3 | 2 AWG 2 AWG | 308 308 | 6 6 | 1870 47.50 | 2621 3900 | |||
| 585945 | 3 3 | 1/0 AWG 1/0 AWG | 273 273 | 4 4 | 2080 52.83 | 2787 4147 | |||
| 588906 | 3 3 | 2/0 AWG 2/0 AWG | 324 324 | 110 2.79 | 3 3 | 2200 55.88 | 3403 5064 | ||
| 643531 | 3 3 | 3/0 AWG 3/0 AWG | 418 418 | 110 2.79 | 2 2 | 2299 58.39 | 4085 6079 | ||
| 588801 | 3 3 | 4/0 AWG 4/0 AWG | 532 532 | 2500 63.50 | 4439 6607 | ||||
| 589188 | 3 3 | 350 KCMIL 350 KCMIL | 855 855 | 2950 74.93 | 6411 9540 | ||||
Standards & References
- ASTM B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire
- ASTM B172 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Copper Conductors
- ICEA S-75-381 Portable and Power Feeder Cables for Use in Mines
- MSHA Approved
Construction
- Conductor:Tin coated, soft drawn, annealed, flexible, rope-lay stranded copper per ASTM B33/B172
- Separator Tape:Semi-conducting tape applied between the conductor and insulation to facilitate stripping
- Conductor Shield:Semi-conducting cross-linked copolymer
- Insulation:Ethylene Propylene Rubber (EPR) 100% Insulation Level
- Shield Separator:Semi-conducting SBR tape applied to the phase insulation with a 50% overlap, adhesive side up
- Braid Shield:Tin coated, soft drawn, annealed, copper braid shield (60% minimum coverage), combined with color coded nylon (black, white, red) with a 40% maximum coverage
- Ground Check Conductor:Tin coated, soft drawn, annealed, rope stranded, flexible lay copper per ASTM B33/B172 with high strength yellow polypropylene insulation
- Ground Conductors:Two uninsulated, tin coated, soft drawn, annealed, rope stranded, flexible lay copper per ASTM B33/B172
- Tape:SBR tape applied over the cabled core for improved mechanical integrity and ease of stripping
- Inner Jacket:Black, mold cured, extra heavy-duty modified integral fill, flame resistant, thermosetting Chlorinated Polyethylene (CPE)
- Reinforcement:Reinforcing twine applied between the two jacket layers
- Outer Jacket:Black, mold cured, extra heavy-duty, flame resistant, thermosetting Chlorinated Polyethylene (CPE). Alternate jacket colors available
- Reflective Stripe:Highly visible reflective stripe embedded into the outer jacket to increase safety and help prevent cable run-over (optional, contact your sales representative for part number)
Resources
There are no downloadable resources for this product.