25kV AAC CAMV™ Spacer Cable

Aluminum Conductors. Track-Resistant HD Polyethylene or Track-Resistant Crosslinked Polyethylene Covering.

Download Category Specifications
PDF Excel Table

Application

Used for primary and secondary overhead distribution where limited space is available or desirable for rights of way. Installed as an uninsulated conductor; however, covering is effective in preventing direct shorts and instantaneous flashovers should tree limbs or other objects contact conductors in such close proximity. The resulting close-proximity configuration minimizes the amount of space and hardware required for line installation; particularly useful in congested areas such as alleyways or tight corridors.

Specifications

measurement
imperial metric
Select a set of products below for more information:
Conductor Ground Wire
No. of Conductors Size (AWG or kcmil) No. of Strands Insulation Thickness (mils) (mm) Size (AWG) No. of Strands Nom. OD (mils) (mm) Nominal Total Weight (lbs/1000') (kgs/km) Allowable Ampacity
234252
1 1
1/0 AWG 1/0 AWG
7 7
866 22.00
307 456
613734
1 1
336.4 KCMIL 336.4 KCMIL
19 19
1133 28.78
618 919
622046
1 1
556.5 KCMIL 556.5 KCMIL
19 19
1320 33.53
894 1330
614769
1 1
795 KCMIL 795 KCMIL
37 37
1472 37.39
1176 1749
623268
1 1
35 MMSQ 35 MMSQ
7 7
797 20.27
249 370
621065
1 1
185 MMSQ 185 MMSQ
19 19
1214 30.86
703 1046

Standards & References

Southwire’s 15kV – 35kV covered multi-layer tree wire meets or exceeds all applicable ICEA specifications and the following ASTM specifications:

  • ASTM B230
  • ASTM B231

Construction

Conductors are concentrically stranded, AAC (1350-H19), either compressed or full compact depending on conductor size, AAAC. Available with high-density track-resistant polyethylene.

  • 1350

Resources

There are no downloadable resources for this product.